This paper presents a novel analysis on a new DC-Excited Flux-Switching Machine (DC-FSM) for Ground Power Unit (GPU) application. The performance of machine under different structures can be studied by a flexible Magnetic Equivalent Circuit (MEC), where the core non-linearity can be fixed on the material B-H curve. The model accuracy can also be adjusted arbitrary by determining the number of proposed MEC elements (flux tubes) for a given structure. The performance analysis of two sample DC-FSMs as two high-frequency 120 V generators is performed by the proposed MEC and validated by 2D and 3D FEM based simulations. The obtained results show a very good improvement in processing time with valuable accuracy. In general, introducing a new DC-FSM for the GPU application and analyzing its performance by proposing a modified MEC approach are the paper novelties which are studied in this work. Since the suggested MEC is more flexible than FEM, it is recommended for designing, modeling, and optimization purposes.
1 October 2019 in International Journal of Electrical Power & Energy Systems
This study presents a novel Linear Resolver (L-Resolver) with two possible winding configurations. The mover has a simple structure, where a single coil is located in its slot as the field winding. Two separate windings are located on the stator as the signals (sine and cosine) windings, for which two possible configurations are proposed. Once a configuration with overlapping coils, and the second is non-overlapping. The accuracy of the proposed resolver is studied, and the resolver’s sensitivity to the asymmetric air-gap is evaluated under both winding configurations. Analyses are performed by the well-known Magnetic Equivalent Circuit (MEC) method thanks to its flexibility and shorter processing time compared with the Finite Element Method (FEM). The results show good accuracy and low sensitivity to the asymmetric air-gap fault. Therefore, the proposed novel resolver is a suitable sensor for linear position sensing compared with others. Finally, the effectiveness of the proposed resolver is proven by performed validation by experimental results.
26 January 2018 in International Transactions on Electrical Energy Systems