29 June 2016 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
GCGuilherme Jardim Carvalho
Guilherme Jardim Carvalho
JTJose Tadeu Garcia Tommaselli
Jose Tadeu Garcia Tommaselli
Bank erosion is caused by a set of factors requiring specific studies to understand them and their possible mitigation. Mobile laser scanning systems are applicable to the time-series analysis of survey data, mainly in areas with small changes over time, due to their high-spatial resolution and accuracy. Laser scanning systems equipped with global navigation satellite system/real-time kinematic (GNSS/RTK) positioning are advantageous because they demand fewer data postprocessing steps, and their accuracy is compatible with RTK accuracy. This study presents a set of techniques developed for marginal erosion monitoring using mobile laser scanning. Experiments to characterize the accuracy of surveys conducted with the mobile laser scanner MDL Dynascan M150 showed that the mean accuracy of surveys varies from 5 to 15 cm depending on the distance from the RTK base to the survey area. The results of an on-site case study are presented, which demonstrate the efficiency and accuracy of the proposed techniques and proves to be a very promising technique to support research on soil erosion.
22 June 2020 in Revista Brasileira de Cartografia
Omnidirectional vision systems allow for a 360° imaging field and are applied in many areas of knowledge, including close range Photogrammetry. Obtaining reliable measurements, the Photogrammetry’s goal, requires calibration of the system, a step in which the parameters of the mathematical models are estimated. The calibration of the system is divided into internal calibration and platform calibration. The main objective of this work is to perform the calibration of the platform of an omnidirectional vision system composed of a camera and a conical mirror. In the calibration of the platform we estimated the parameters that relate the imaging system to the georeferencing system, composed of a GNSS (Global Navigation Satellite System) receiver and an IMU (Inertial Measurement Unit). In the calibration of the platform the boresight angles of the IMU were estimated related to the cone reference and the lever arm of the vertex of the cone to the center of the GNSS antenna. The uncertainty in the estimation of the lever arm is at least 10 times less than the precision obtained with the GNSS receiver in kinematic mode, which indicates an adequate quality for the estimated value. Regarding the misalignment angles, the RMSE (Root Mean Square Error) was higher for the rotation angle