The structural design and performance test of the sub-mirror co-phase correction device were finished. The device covered two-stage structure and was mainly composed of coarse adjustment stage, fine adjustment stage and lateral unloading mechanism. Based on the finite element method, the overall design and the performance analysis of the device were finished, and then the prototype development and basic performance test were also completed. Finally, the test results indicate that the displacement of adjustment system is about ±2.5 mm, the accuracy is about 30 nm RMS, and the natural frequency is about 70.3 Hz with analog mirror, which are in good agreement with the finite element analysis results. In conclusion, the performance of the design meets the requirements of the segmented-mirrors.
The structural deformations induced by rocket launch vibrations, on-orbit thermal gradients, and gravitation fluctuations can lead to significant deployment errors for large-aperture, segmented space telescopes. As the size and number of segments increase in future telescopes, the optical-based methods for detecting deployment errors suffer from the range limitations of the millimeter scale and time-consuming processes of the month scale. To address this, we propose a new method for rapid-deployment error detection based on long-range, high-precision capacitive edge sensors. These sensors feature a measurement range of ±13 mm, with a precision better than 7.3 nm, enabling efficient and simultaneous error detection across all segments. This approach significantly reduces the time and steps required compared to traditional optical methods. Through experimental validation, the designed system demonstrated the ability to detect and correct large deployment errors and maintain co-phasing precision, meeting the stringent requirements for future space telescopes. The proposed sensor system enhances deployment efficiency, offering a viable solution for the next generation of segmented space telescopes.