9 August 2016 in IEEE Sensors Journal
A novel microfluidic-integrated microwave sensor with potential application in microliter-volume biological/ biomedical liquid sample characterization and quantification is presented in this paper. The sensor is designed based on the resonance method, providing the best sensing accuracy, and implemented by using a substrate-integrated-waveguide (SIW) structure combining with a rectangular slot antenna operating at 10 GHz. The device can perform accurate characterization of various liquid materials from very low to high loss, demonstrated by the measurement of deionized water and methanol liquid mixtures. The measured relative permittivity, which is the real part of complex permittivity, ranges from 8.58 to 66.12, which is simply limited by the choice of test materials available in our laboratory, not any other technical considerations of the sensor. The fabricated sensor prototype requires a very small liquid volume of less than 7 μL, while still offering an overall accuracy of better than 3%, as compared with the commercial and other published works. The key advantages of the proposed sensor are that it combines: a very low-profile planar and miniaturized structure sensing microliter liquid volume; ease of design and fabrication, which makes it cost-effective to manufacture; and noninvasive and contactless measurements. Moreover, since the microfluidic subsystem can potentially be detached from the SIW microwave sensor and, afterward, replaced by a new microfluidic component, the sensor can be reused with no life-cycle limitation and without degrading any figure of merit.
10 November 2017 in IEEE Sensors Journal
This paper reports on a miniaturized lab-on-a-waveguide liquid-mixture sensor, achieving highly accurate nanoliter liquid sample characterization, for biomedical applications. The nanofluidic-integrated millimeter-wave sensor design is based on a near-field transmission-line technique implemented by a single loop slot antenna operating at 91 GHz, fabricated into the lid of a photolaser-based subtractive manufactured WR-10 rectangular waveguide. The nanofluidic subsystem, which is mounted on the top of the antenna aperture, is fabricated by using multiple polytetrafluoroethylene layers to encapsulate and isolate the liquid sample during the experiment, hence, offering various preferable features, e.g., noninvasive and contactless measurements. Moreover, the sensor is reusable by replacing only the nanofluidic subsystem, resulting in a cost-effective sensor. The novel sensor can measure a liquid volume of as low as 210 nanoliters, while still achieving a discrimination accuracy of better than 2% of ethanol in the ethanol/deionized-water liquid mixture with a standard deviation of lower than 0.008 from at least three repeated measurements, resulting in the highest accurate ethanol and DI-water discriminator reported to date. The nanofluidic-integrated millimeter-wave sensor also offers other advantages, such as the ease of design, low fabrication and material cost, and no life-cycle limitation of the millimeter-wave subsystem.