Monitoring the reliability of the obtained user position is of great importance, especially when using the global positioning system (GPS) as a standalone system. In the work presented here, we discuss reliability testing, reliability enhancement, and quality control for global navigation satellite system (GNSS) positioning. Reliability testing usually relies on statistical tests for receiver autonomous integrity monitoring (RAIM) and fault detection and exclusion (FDE). It is here extended by including an assessment of the redundancy and the geometry of the obtained user position solution. The reliability enhancement discussed here includes rejection of possible outliers, and the use of a robust estimator, namely a modified Danish method. We draw special attention to navigation applications in degraded signal-environments such as indoors where typically multiple errors occur simultaneously. The results of applying the discussed methods to high-sensitivity GPS data from an indoor experiment demonstrate that weighted estimation, FDE, and quality control yield a significant improvement in reliability and accuracy. The accuracy actually obtained was by 40% better than with equal weights and no FDE; the rms value of horizontal errors was reduced from 15 m to 9 m, and the maximum horizontal errors were largely reduced.
25 April 2014 in IEEE Transactions on Instrumentation and Measurement
Accurate position information is nowadays very important in many applications. For instance, maintaining the situation awareness in command center in emergency operations is very crucial. Due to signal strength attenuation and multipath, Global Navigation Satellite Systems are not suitable for indoor navigation purposes. Radio network-based positioning techniques, such as wireless local area network, require local infrastructure that is often vulnerable in emergency situations. We propose here a distributed system for personal positioning based on inertial sensors. The system consists of an inertial measurement unit (IMU) connected to a radio carried by a person and the server connected to another radio. Step length and heading estimation is computed in the IMU and sent to the server. On the server side, the position is estimated using particle filter-based map matching. The benefit of the distributed architecture is that the computational capacity can be kept very low on the user side, which leads to long operation time as power consumption also remains very low.
14 November 2012 in Journal of Signal Processing Systems
MEMS gyroscopes are gaining popularity because of their low manufacturing costs in large quantities. For navigation system engineering, this presents a challenge because of strong nonstationary noise processes, such as 1/f noise, in the output of MEMS gyros. In practice, on-the-fly calibration is often required before the gyroscope data are useful and comparable to more expensive optical gyroscopes. In this paper, we focus on an important part of MEMS gyro processing, i.e., predicting the future bias given calibration data with known (usually zero) input. We derive prediction algorithms based on Kalman filtering and the computation of moving averages, and compare their performance against simple averaging of the calibration data based on both simulations and real measured data. The results show that it is necessary to model fractional noise in order to consistently predict the bias of a modern MEMS gyro, but the complexity of the Kalman filter approach makes other methods, such as the moving averages, appealing.