12 July 2018 in International Journal of Damage Mechanics
Concrete structures in cold regions are exposed to cyclic freezing and thawing environment, leading to degraded mechanical and fracture properties of concrete due to microstructural damage. While the X-ray micro-/nano-computed tomography technology has been implemented to directly observe concrete microstructure and characterize local damage in recent years, the freeze-thawed damage evolution processes and its effect on overall mechanical performance are not well understood. In this paper, the X-ray nano-computed tomography technology and micro-scale cohesive zone model are combined to quantitatively investigate microstructural damage evolution and its effect on fracture behavior of freeze-thawed concrete samples in three-point bending tests. A two-level micro-to-macro scale finite element model is developed based on computed tomography microstructural images with microcracks due to freeze-thaw cycles. The macroscopic load–deflection curves and fracture energies are simulated and compared favorably with experimental results. Simulation results demonstrate that microcracks caused by freeze-thaw actions are the primary reason for degradation of concrete mechanical properties. Fracture behaviors of frost-damaged concrete with different mortar and interfacial transition zone strength and fracture constants are also simulated and discussed. The combined X-ray nano-computed tomography technology and cohesive zone model proposed is effective in characterizing fracture behavior of concrete and capturing freeze-thaw cycle-induced microstructural damage evolution and its effect on fracture process of concrete.
24 November 2022 in International Journal of Mechanical Sciences
8 November 2018 in KSCE Journal of Civil Engineering
This paper investigated and simulated the mechanical effect of root reinforcing soil and stabilizing slope. The unconfined compression test was used to investigate the reinforcement soil behavior of herb roots. This paper used the 3D finite element to quantify the mechanical effect of the herb root for slope’s stability in terms of the safety factor. The soil was simulated by an elastic-plastic model, and the root was simulated by a linear elastic model. Results show that using the Root Content (RC) to estimate the additional cohesion cr of Setaria sphacelata and Orchardgrass was a simple and reliable method. Lateral fine roots can play a more significant role in reinforcing soils and slopes. Compared to various slope angles, the steep slope was less stable. The slope existed a slope angle threshold αthr. When the slope angle α was smaller than αthr, the herb root system can improve the stability of slope. The α existed an optimal angle αopt for the root system. When α = αopt and α < αthr, the herb roots can exert its maximum stabilization capacity. Moreover, we can select herb species with lateral fine roots and more roots in deeper soil layer. Results can better estimate the cr for the herb of lateral fine roots and select the herb and the slope’s geometry in the engineering.
1 February 2023 in Journal of Engineering Mechanics
In this paper, an element-based deep learning approach named DeepFEM for solving nonlinear partial differential equations (PDEs) in solid mechanics is developed to reduce the number of sampling points required for training the deep neural network. Shape functions are introduced into deep learning to approximate the displacement field within the element. A general scheme for training the deep neural network based on derivatives computed from the shape functions is proposed. For the sake of demonstrations, the nonlinear vibration, nonlinear bending, and cohesive fracture problems are solved, and the results are compared with those from the existing methods to evaluate the performance of the present method. The results demonstrate that DeepFEM can effectively approximate the solution of the nonlinear mechanics problems with high accuracy, while the shape functions can significantly improve the computational efficiency. Moreover, with the trained DeepFEM model, the solutions of nonlinear problems with different geometric or material properties can be obtained instantly without retraining. Finally, the proposed DeepFEM is employed in the identification of material parameters of composite plate. The results show that the longitudinal and transverse elastic moduli of the ply in the composite plates can be accurately predicted based on the nonlinear mechanical response of plates.
1 May 2020 in Construction and Building Materials