The octopus couples controllable adhesives with intricately embedded sensing, processing, and control to manipulate underwater objects. Current synthetic adhesive–based manipulators are typically manually operated without sensing or control and can be slow to activate and release adhesion, which limits system-level manipulation. Here, we couple switchable, octopus-inspired adhesives with embedded sensing, processing, and control for robust underwater manipulation. Adhesion strength is switched over 450× from the ON to OFF state in <50 ms over many cycles with an actively controlled membrane. Systematic design of adhesive geometry enables adherence to nonideal surfaces with low preload and independent control of adhesive strength and adhesive toughness for strong and reliable attachment and easy release. Our bio-inspired nervous system detects objects and autonomously triggers the switchable adhesives. This is implemented into a wearable glove where an array of adhesives and sensors creates a biomimetic adhesive skin to manipulate diverse underwater objects.
Biological organisms such as the octopus can reconfigure their shape and properties to perform diverse tasks. However, soft machines struggle to achieve complex configurations, morph into shape to support loads, and go between multiple states reversibly. Here, we introduce a multifunctional shape-morphing material with reversible and rapid polymorphic reconfigurability. We couple elastomeric kirigami with an unconventional reversible plasticity mechanism in metal alloys to rapidly ( < 0.1 seconds) morph flat sheets into complex, load-bearing shapes, with reversibility and self-healing through phase change. This kirigami composite overcomes trade-offs in deformability and load-bearing capacity and eliminates power requirements to sustain reconfigured shapes. We demonstrate this material through integration with onboard control, motors, and power to create a soft robotic morphing drone, which autonomously transforms from a ground to air vehicle and an underwater morphing machine, which can be reversibly deployed to collect cargo.
22 April 2019 in ACS Applied Materials & Interfaces
Soft electronics and robotics are in increasing demand for diverse applications. However, soft devices typically lack rigid enclosures which can increase their susceptibility to damage and lead to failure and premature disposal. This creates a need for soft and stretchable functional materials with resilient and regenerative properties. Here we show a liquid metal-elastomer-plasticizer composite for soft electronics with robust circuitry that is self-healing, reconfigurable, and ultimately recyclable. This is achieved through an embossing technique for on-demand formation of conductive liquid metal networks which can be reprocessed to rewire or completely recycle the soft electronic composite. These skin-like electronics stretch to 1200% strain with minimal change in electrical resistance, sustain numerous damage events under load without losing electrical conductivity, and are recycled to generate new devices at the end of life. These soft composites with adaptive liquid metal microstructures can find broad use for soft electronics and robotics with improved lifetime and recyclability.
Conductive adhesives are required for the integration of dissimilar material components to create soft electronic and robotic systems. Here, a heterogeneous liquid metal‐based conductive adhesive is developed that reversibly attaches to diverse surfaces with high stretchability (>100% strain), low modulus ( 70 Jm−2 (≈ 25x enhancement over unmodified composites) and described with a viscoelastic analysis, providing design guidelines for controllable yet reversible adhesion in electrically conductive systems. The architecture of STICK‐LM adhesives provides anisotropic and heterogeneous electrical conductivity and enables direct integration into soft functional systems. This is demonstrated with deformable fuses for robotic joints, repositionable electronics that rapidly attach on curvilinear surfaces, and stretchable adhesive conductors with nearly constant electrical resistance. This study provides a methodology for electrically conductive, reversible adhesives for electrical and mechanical integration of multicomponent systems in emerging technologies.