16 January 2020 in IEEE Transactions on Systems, Man, and Cybernetics: Systems
Autonomous vehicles’ dynamics stability control is one key issue to ensure safety of self-driving. However, vehicle uncertainties and time-varying parameters could weaken the performance of autonomous vehicle stability control. Therefore, this article proposes a novel robust linear matrix inequality (LMI)-based $H$ -infinite feedback algorithm for vehicle dynamics stability control, and this algorithm controls vehicle steering system and brake system via direct yaw moment control (DYC) and active front steering control (AFS). The presented controller is robust against vehicle parametric uncertainties, including the vehicle mass and vehicle longitudinal velocity. A linear parameter varying lateral model is constructed utilizing polytopic uncertainty method considering time-varying vehicle longitudinal velocity and mass, where a polytope that contains finite vertices is established to contain all of the possible selections for uncertainty parameters. Then, the $H$ -infinite feedback controller integrating DYC and AFS is derived via LMI technique. Finally, experimental results based on hardware-in-the-loop (HIL) platform illustrate that the presented controller has better performance of ensuring autonomous vehicle dynamics stability than other controllers.
20 July 2020 in IEEE Transactions on Transportation Electrification
Brake-by-wire (BBW) is a critical technology in modern automotive and lays the solid foundation for intelligent vehicles. A control strategy to take full advantages of this system both in active brake and conventional boosting brake is essential for the BBW system, which is a challenging issue because of its complex structure and high requirement for rapid dynamic response and control accuracy. To get satisfied performance and control effect, this paper designs a new type of electric booster installing on the electro-hydraulic brake (EHB) system which can realize active brake control and brake boosting simultaneously, then a synthetic control architecture special for this system is put forward. Firstly, system principle and detailed modelling are given. Then an adaptive dual-loop brake pressure control approach is proposed where a modified PID controller is used as the outer control loop to track the desire pressure and an inner loop named adaptive current control is employed to guarantee the brushless direct electric motor (BLDC) performance of tracking current considering the parametric variation and system uncertainties. Besides, the stability of the inner loop control is proved. Meanwhile, a user-defined brake boosting framework is designed to realize electric boosting brake. Simulation and experimental validation are implemented to demonstrate the feasibility of the system and the effectiveness of the control strategy design eventually, manifesting that the proposed BBW system and its control strategy can obtain satisfied performance.
5 April 2021 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
The autonomous vehicle has been developed widely, and attracted much attention of global automotive industry. Wherein, longitudinal dynamics control is one of the most crucial issues of autonomous vehicles. The throttle-by-wire (TBW) control could implement the acceleration command through adjusting the throttle opening, thus control the driving torque of the fuel autonomous vehicle. However, an automated vehicle controlled by traditional TBW in low-friction road conditions could reach large slip ratio region, which could adversely cause the loss of vehicle longitudinal dynamic stability. To tackle the mentioned issues, this paper proposes an adaptive sliding-mode control (SMC) algorithm to optimize tire slip speed of the automated vehicle. When the intervention conditions of active acceleration are satisfied, the TBW can take over the throttle opening control instead of the driver. Firstly, the SMC can calculate an intervention of the effective torque input based on tire torque balance dynamics. Moreover, a traction control system (TCS) and TBW coupling strategy based on the logic threshold method is put forward to response the optimum slip speed curve. Thus, during the vehicle starting process, a three-layer control strategy consisting of TBW, torque control, and pressure control of TCS is involved. Finally, real-car snow and ice road tests are carried out, and experimental results demonstrate great performance of the proposed strategy in complicated low-friction road.