7 July 2022 in Nature Communications
Biohybrid is a newly emerging and promising approach to construct soft robotics and soft machines with novel functions, high energy efficiency, great adaptivity and intelligence. Despite many unique advantages of biohybrid systems, it is well known that most biohybrid systems have a relatively short lifetime, require complex fabrication process, and only remain functional with careful maintenance. Herein, we introduce a simple method to create a highly robust and power-free soft biohybrid mechanoluminescence, by encapsulating dinoflagellates, bioluminescent unicellular marine algae, into soft elastomeric chambers. The dinoflagellates retain their intrinsic bioluminescence, which is a near-instantaneous light response to mechanical forces. We demonstrate the robustness of various geometries of biohybrid mechanoluminescent devices, as well as potential applications such as visualizing external mechanical perturbations, deformation-induced illumination, and optical signaling in a dark environment. Our biohybrid mechanoluminescent devices are ultra-sensitive with fast response time and can maintain their light emission capability for weeks without special maintenance.
20 October 2023 in Science Advances
Mechanosensing, the transduction of extracellular mechanical stimuli into intracellular biochemical signals, is a fundamental property of living cells. However, endowing synthetic materials with mechanosensing capabilities comparable to biological levels is challenging. Here, we developed ultrasensitive and robust mechanoluminescent living composites using hydrogels embedded with dinoflagellates, unicellular microalgae with a near-instantaneous and ultrasensitive bioluminescent response to mechanical stress. Not only did embedded dinoflagellates retain their intrinsic mechanoluminescence, but with hydrophobic coatings, living composites had a lifetime of ~5 months under harsh conditions with minimal maintenance. We 3D-printed living composites into large-scale mechanoluminescent structures with high spatial resolution, and we also enhanced their mechanical properties with double-network hydrogels. We propose a counterpart mathematical model that captured experimental mechanoluminescent observations to predict mechanoluminescence based on deformation and applied stress. We also demonstrated the use of the mechanosensing composites for biomimetic soft actuators that emitted colored light upon magnetic actuation. These mechanosensing composites have substantial potential in biohybrid sensors and robotics.
9 February 2000 in Journal of Phycology
1 September 2008 in Journal of Experimental Biology
Dinoflagellate bioluminescence serves as a model system for examining mechanosensing by suspended motile unicellular organisms. The response latency, i.e. the delay time between the mechanical stimulus and luminescent response, provides information about the mechanotransduction and signaling process, and must be accurately known for dinoflagellate bioluminescence to be used as a flow visualization tool. This study used a novel microfluidic device to measure the response latency of a large number of individual dinoflagellates with a resolution of a few milliseconds. Suspended cells of several dinoflagellate species approximately 35 μm in diameter were directed through a 200 μm deep channel to a barrier with a 15 μm clearance impassable to the cells. Bioluminescence was stimulated when cells encountered the barrier and experienced an abrupt increase in hydrodynamic drag, and was imaged using high numerical aperture optics and a high-speed low-light video system. The average response latency for Lingulodinium polyedrum strain HJ was 15 ms (N>300 cells) at the three highest flow rates tested, with a minimum latency of 12 ms. Cells produced multiple flashes with an interval as short as 5 ms between individual flashes, suggesting that repeat stimulation involved a subset of the entire intracellular signaling pathway. The mean response latency for the dinoflagellates Pyrodinium bahamense, Alexandrium monilatum and older and newer isolates of L. polyedrum ranged from 15 to 22 ms, similar to the latencies previously determined for larger dinoflagellates with different morphologies, possibly reflecting optimization of dinoflagellate bioluminescence as a rapid anti-predation behavior.
1 May 2004 in Journal of Experimental Biology
SUMMARY Dinoflagellate bioluminescence provides a near-instantaneous reporter of cell response to flow. Although both fluid shear stress and acceleration are thought to be stimulatory, previous studies have used flow fields dominated by shear. In the present study, computational and experimental approaches were used to assess the relative contributions to bioluminescence stimulation of shear stress and acceleration in a laminar converging nozzle. This flow field is characterized by separate regions of pronounced acceleration away from the walls, and shear along the wall. Bioluminescence of the dinoflagellates Lingulodinium polyedrum and Ceratocorys horrida, chosen because of their previously characterized different flow sensitivities, was imaged with a low-light video system. Numerical simulations were used to calculate the position of stimulated cells and the levels of acceleration and shear stress at these positions. Cells were stimulated at the nozzle throat within the wall boundary layer where, for that downstream position, shear stress was relatively high and acceleration relatively low. Cells of C. horrida were always stimulated significantly higher in the flow field than cells of L. polyedrum and at lower flow rates, consistent with their greater flow sensitivity. For both species, shear stress levels at the position of stimulated cells were similar to but slightly greater than previously determined response thresholds using independent flow fields. L. polyedrum did not respond in conditions where acceleration was as high as 20 g. These results indicate that shear stress, rather than acceleration, was the stimulatory component of flow. Thus, even in conditions of high acceleration, dinoflagellate bioluminescence is an effective marker of shear stress.
1 March 2015 in Biophysical Journal