1 January 2004 in Chemical Physics Letters
7 February 2023 in Materials Chemistry and Physics
26 October 2024 in Scientific Reports
The current study describes current conduction mechanisms in BiFeO3 thin films prepared by using a modified chemical solution-based technique. In particular, in these films, X-ray photoelectron spectroscopy revealed that the defect causing Fe2+ ions reduced by about 18% compared to the solution-based synthesis methods reported before, indicating better film quality. The leakage current density was measured to be 1.7 × 10–6 A/cm2 at an applied voltage of 1.5 V, which is one order of magnitude less than the previously reported work in a similar system. Oxygen annealing was found to be effective in further reducing the current conduction, making these films a suitable choice for device applications. The current–voltage curves exhibited three different behaviours of current conduction mechanisms in these films. In particular, when the applied electric field was increased, a transition from Ohmic conduction to trap-filled space charge limited conduction was observed. The presented investigations demonstrate the importance of deposition methods in determining the suitability of thin films for device applications.
1 September 2021 in Materials Science and Engineering: B
1 November 2021 in Journal of Physics: Conference Series
BVB. Harihara Venkataraman
BiFeO3 (BFO) and Mn-doped BFO thin films are prepared on indium tin oxide/glass substrates using wet chemical deposition technique. The role of Mn defects (3% to 10%) on the leakage current density and other physical properties of BFO thin film devices is investigated. The X-ray diffraction patterns confirm the single-phase formation of rhombohedrally distorted BFO thin films. The scanning electron microscopy images approve uniform and crack-free film depositions, which is of great importance to the practical device applications of such materials. The oxidation states are determined by X-ray photoelectron spectroscopy (XPS). These XPS results reveal the presence of multiple valence states of Fe ions (Fe2+, Fe3+) and Mn (Mn3+, Mn4+) ions, which play a decisive role in determining the leakage current density. However, the Mn-doping at the Fe site in BFO reduces oxygen vacancies and Fe2+ states, hence suppressing the leakage current density. The leakage current density is reduced by three orders of magnitude (10−4 – 10−7) A/cm2, upon Mn-doping as clearly demonstrated by J-V characteristics. These results indicate that the primary contributors to the conduction in BFO based thin films are oxygen vacancies and the Fe2+ states in these devices.
28 March 2025 in Renewable Energy