Surface micro-nanostructuring can provide new functionalities and properties to coatings. For example, it can improve the absorption efficiency, hydrophobicity and/or tribology properties. In this context, we studied the influence of micro-nanostructuring on the photocatalytic efficiency of sol-gel TiO2 coatings during formic acid degradation under UV illumination. The micro-nanostructuring was performed using the UV illumination of microspheres deposited on a photopatternable sol-gel layer, leading to a hexagonal arrangement of micropillars after development. The structures and coatings were characterized using Raman spectroscopy, ellipsometry, atomic force microscopy and scanning electron microscopy. When the sol-gel TiO2 films were unstructured and untreated at 500 °C, their effect on formic acid’s degradation under UV light was negligible. However, when the films were annealed at 500 °C, they crystallized in the anatase phase and affected the degradation of formic acid under UV light, also depending on the thickness of the layer. Finally, we demonstrated that surface micro-nanostructuring in the form of nanopillars can significantly increase the photocatalytic efficiency of a coating during the degradation of formic acid under UV light.
The phenomenon of resonant reflection from a grating-coupled waveguide mode is conceptually, technologically, and experimentally transposed from a planar corrugated waveguide structure under plane wave excitation to a circularly symmetrical waveguide at the inner wall of a tube under cylindrical wave excitation. The mode coupling element is an azimuthally periodic wall corrugation having an integer number of lines parallel to the tube axis. The grating is defined by diffractive coordinate transform of a radial grating phase-mask transverse to the tube axis under axial beam exposure onto a photoresist-coated TiO2 sol-gel wall-waveguide. The holistic excitation of a waveguide mode is achieved by transforming a broad spectrum, centered axial incident beam into a cylindrical wave by a centered, 90° apex reflective cone. The expected resonantly reflected cylindrical wave at the mode-coupling wavelength is in turn transformed back into an axial beam by the cone. TE resonant reflection is demonstrated experimentally.