The mechanical response of composite structures may be affected by harsh environments, particularly when the matrix has a major contribution, e.g. with off-axis plies. This study aims at investigating the influence of the winding pattern on the axial compressive behavior of filament wound composite cylinder under hygrothermal conditioning. Carbon fiber-reinforced epoxy cylinders were manufactured via filament winding with 1/1, 3/1, and 5/1 mosaic winding patterns and submitted to distilled and artificial seawater environmental conditioning. Water uptake for each hygrothermal conditioning was periodically monitored. The winding pattern influenced both compressive strength and stiffness, and the environmental conditioning decreased strength up to ≈10%. The winding pattern with three diamonds around the circumference of the cylinders provides the properties in term of compressive strength and stiffness.
In this paper, a novel hybrid manufacturing process that combines filament winding (FW) and tailored fiber placement (TFP) is introduced. The main idea is to place a TFP patch in between two filament wound layers aiming at maximizing the load transfer between the parts. To assess its feasibility, physical properties, such as density, fiber volume fraction and void content, and also the hybrid process kinematics and error propagation are evaluated. Furthermore, to determine the mechanical performance of this novel procedure, axial compression tests are carried out considering several unidirectional TFP patches. Key results show low-void content and good cross-section quality, demonstrating the feasibility of the process. In addition, mass–normalized load peaks as high as 394% with respect to the reference (non-patched) cylinder were obtained.