The deployment of electric vehicle charging stations degrades the quality of power in the distribution grid. This article proposes an interval type-2 fuzzy logic controlled shunt converter coupled novel high-quality charging scheme for electric vehicles. This system includes three-phase bidirectional front-end ac-dc pulsewidth modulation (PWM) converter, backend dc-dc PWM converter and three-phase three-wire distribution static compensator. The bidirectional converters help to perform both grid to vehicle and vehicle to grid mode of operations. The combination of dc-link voltage with decoupled current control technique is exploited for ac-dc converter. A multistep constant current control technique is proposed for the dc-dc converter to charge and discharge the battery. A fuzzy logic controller based instantaneous reactive power theory control method is proposed for shunt converter. The performance of type-1, interval type-2, and real coded genetic algorithm optimized fuzzy logic controllers are evaluated by the shunt converter dc-link voltage and the total harmonic distortion of the source current. Lithium-ion batteries are utilized as an energy storage device for electric vehicles in the proposed system. The entire system is modeled and evaluated in the MATLAB/Simulink environment. An interval type-2 and real coded genetic algorithm optimized fuzzy logic controller affords the better performance during V2G and G2V operations, respectively.
In the current scenario, integration of renewables, growth of non-linear industrial and commercial loads results in various power quality issues. Among commercial utilities connected to the grid, hospital-operated loads include sensitive, linear, non-linear, and unbalanced loads. These loads are diverse as well as prioritized, which also causes major power quality issues in the local distribution system. Due to its widespread divergence, it leads to harmonic injection and reactive power imbalance. Distribution Static Compensator (DSTATCOM) is proposed as a solution for harmonic mitigation, load balancing, reactive power imbalances, and neutral current compensation. The present work utilizes Interval Type-2 Fuzzy Logic Controller (IT2FLC) with Recursive Least Square (RLS) filter for generating switching pulses for IGBT switches in the DSTATCOM to improve power quality in the Local Distribution Grid. The proposed approach also shows superior performance over Type 1 fuzzy logic controller and Conventional PI controller in mitigating harmonics. For effective realization, the proposed system is simulated using MATLAB software.
25 January 2022 in IEEE Transactions on Transportation Electrification
A high-quality power supply is required for the proper functioning of the electric vehicle (EV) charging system. However, the voltage quality is one of the significant issues in the distribution grid. This article aims to examine the impacts of voltage disturbance on EV batteries and charging systems, and provides a fault ride-through capability (FRTC) to enhance the voltage quality. The charging system is constructed by the three-phase controlled rectifier and the dc–dc converter. The EV battery pack is modeled with lithium-ion batteries. The FRTC system is designed to improve the voltage quality, and it is achieved through the dynamic voltage restorer. It protects the EV batteries and charging system from the critical voltage sag levels. The performance of the proposed EV charging station (EVCS) has been investigated in 30%, 60%, and 90% voltage sag through the MATLAB/Simulink platform. Also, the real-time validation has been carried out by the software-in-the-loop test with the help of the dSPACE (DS1202) real-time system. The EVCS with an FRTC system provides better performance than the conventional EVCS.
4 October 2022 in IEEE Transactions on Industrial Informatics
The growth of electric vehicle loads increases the harmonics in the distribution grid. This article proposes a mixed step size normalized least mean fourth control algorithm (MSSNLMF) of distribution static compensator to alleviate the harmonics in the electric vehicles connected distribution grid. The overall system comprises bidirectional ac–dc, dc–dc converters, and distribution static compensator. The bidirectional converters are employed to achieve the vehicle to grid and grid to vehicle operations. A lithium-ion battery is utilized as an electric vehicle energy storage device. An adaptive MSSNLMF control algorithm is proposed to extract active and reactive power signals from the distorted load current to obtain the reference source currents. This algorithm combines the least mean fourth and normalized least mean fourth algorithms with mixed step size. The performance of the control algorithm is evaluated in the MATLAB/Simulink environment. It is experimentally verified through the real time simulation using the dSPACE (DS1202) real-time processor. The proposed MSSNLMF algorithm performs well in the DSTATCOM dc-link voltage regulation and reduction of total harmonic distortion. The source current total harmonic distortion is maintained below the allowable limit of IEEE 519-2014 standard.
28 November 2023 in IEEE Transactions on Industrial Informatics
Plug-in electric vehicles (EVs) are viewed as a step forward in the electrification of transportation, replacing conventional vehicles powered by internal combustion engines. However, to provide consistent and efficient charging, the EV charging infrastructure needs to be developed, which is capable of delivering distortion-free grid supply, even in the absence of renewable energy resources. This article presents an application of a grid-connected EV charger supplied by a grid-connected solar photovoltaic array that provides 24/7 distortion-free charging. The bidirectional charging system includes an EV battery connected to the dc bus; an independent solar-PV source connected to the ac grid through a bifunctional voltage source converter. A new conjugate gradient based adaptive control algorithm is implemented for the voltage source converter control. Real-time analysis is done using dSPACE 1202 processor. The proposed system is validated to maintain IEEE-519 standards.