7 September 2022 in Sensors and Actuators A: Physical
4 June 2024 in Communications Engineering
Three dimensional sensing is essential in order that machines may operate in and interact with complex dynamic environments. Solid-state beam scanning devices are seen as being key to achieving required system specifications in terms of sensing range, resolution, refresh rate and cost. Integrated optical phased arrays fabricated on silicon wafers are a potential solution, but demonstrated devices with system-level performance currently rely on expensive widely tunable source lasers. Here, we combine silicon nitride photonics and micro-electromechanical system technologies, demonstrating the integration of an active photonic beam-steering circuit into a piezoelectric actuated micro cantilever. An optical phased array, operating at a wavelength of 905 nm, provides output beam scanning over a range of 17° in one dimension, while the inclination of the entire circuit and consequently the angle of the output beam in a second dimension can be independently modified over a range of up to 40° using the piezoelectric actuator.
29 May 2025 in Communications Engineering
Miniaturized loudspeakers are increasingly relevant for wearable and transparent electronics, but achieving consistent acoustic performance, particularly at low frequencies, remains a challenge. Here we show a polymer-based loudspeaker that features a partially stiffened membrane actuated by a transferred thin film of lead zirconate titanate. The flexible polymer reduces overall stiffness, while the localized stiffening broadens the frequency response. The piezoelectric film is integrated through a transfer process that employs a donor substrate. We evaluate functionality through electrical, mechanical, acoustic, and optical measurements, including sound pressure level and resonance frequency, in both open field and in-ear conditions. The results confirm the device’s ability to operate under different acoustic loads and demonstrate compatibility of the fabrication process with flexible and transparent substrates. This approach enables the integration of transparent piezoelectric actuators and is suitable for compact, bendable, and optically transparent audio systems.
18 January 2024 in Research Square
Using wafer level fabrication techniques, we combine silicon photonics and MEMS technologies to demonstrate the integration of an active photonic beam-steering circuit into a piezoelectric actuated micro cantilever. An optical phased array (OPA), operating at a wavelength of 905nm, provides output beam scanning over a range of 17° in one dimension, while the inclination of the entire circuit and consequently the angle of the output beam in a second dimension can be independently modified over a range of up to 40° via the piezoelectric actuator. This combination of existing commercial silicon technologies can provide continuous, low-divergence, solid-state beam scanning for sensing applications, while avoiding the disadvantages associated with the use of a widely tunable source laser.