At present, polyurethane (PU) has been extensively used as a grouting material in civil engineering. The mechanical properties of PU are the key to achieving the desirable grouting effect. This study presents the research results of the mechanical behavior of PU matrix under tensile, successive cyclic tensile, and stress relaxation at the nanoscale, using the coarse-grained molecular dynamics simulation method. The influences of the number of molecule chains and strain rate on the tensile mechanical properties are discussed, and the tensile deformation mechanism of PU matrix is revealed. The tensile strength of PU matrix is independent of loading path, and after yielding, the strain of PU matrix contains the elastic strain, plastic strain, and viscous strain. In the stress relaxation process, the evolution of the axial stress is mainly caused by the varied van der Waals interactions. The stress relaxation behavior of PU matrix can be described by the viscoelastic model consisting of one elastic element in parallel with one Maxwell element.
21 April 2022 in Advances in Materials Science and Engineering
The newly developed two-component polymer (TFPU) cut-off walls have great application potential in civil engineering for water-seepage prevention. Investigating the mechanical interactions between TFPU and soil from the theoretical perspective can provide a basis for furtherly evaluating the stability of TFPU cut-off walls, which, however, has not been conducted. In this study, based on the shear testing results, the shear damage model of the TFPU-bentonite contact surface was established. Studies show that the TFPU-bentonite contact surface performs strain-softening behavior under shear and that the strain-softening behavior becomes less and less obvious when the normal stress increases. The theoretical shear stress-strain curves are in good consistent with the experimental ones, and the maximum differences between the theoretical shear stress and shear strain at yield and the experimental ones are about 3.88% and 3.40%, respectively, indicating that the shear damage model can reflect the mechanical properties of the TFPU-bentonite contact surface. The critical damage of the contact surface increases from 0.05 to 0.50 in the power function way when normal stress increases from 75 to 1200 kPa, implying that the shear failure of the contact surfaces changes from brittleness to ductility. This study provides a theoretical base for evaluating the influences of the TFPU-soil contact surface on the stability of the TFPU cut-off wall structures.