Ling Chung

Ling Chung

Auto-generated profile, based on publicly available information

Ling Chung

University of Melbourne

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2019 in American Mineralogist: Journal of Earth and Planetary Materials
Verified
Journal Article
Closed access
MTMurat Tamer
Murat Tamer
LCLing Chung
Ling Chung
RKRichard Ketcham
Richard Ketcham
AGAndrew J.W. Gleadow
Andrew J.W. Gleadow
Previous inter-laboratory experiments on confined fission-track length measurements in apatite have consistently reported variation substantially in excess of statistical expectation. There are two primary causes for this variation: (1) differences in laboratory procedures and instrumentation, and (2) personal differences in perception and assessment between analysts. In this study, we narrow these elements down to two categories, etching procedure and analyst bias. We assembled a set of eight samples with induced tracks from four apatite varieties, initially irradiated between 2 and 43 years prior to etching. Two mounts were made containing aliquots of each sample to ensure identical etching conditions for all apatites on a mount. We employed two widely used etching protocols, 5.0 M HNO3 at 20 °C for 20 s and 5.5 M HNO3 at 21 °C for 20 s. Sets of track images were then captured by an automated system and exchanged between two analysts, so that measurements could be carried out on the same tracks and etch figures, in the same image data, allowing us to isolate and examine the effects of analyst bias. An additional 5 s of etching was then used to evaluate etching behavior at track tips. In total, 8391 confined fission-track length measurements were performed; along with 1480 etch figure length measurements. When the analysts evaluated each other's track selections within the same images for suitability for measurement, the average rejection rate was ~14%. For tracks judged as suitable by both analysts, measurements of 2D and 3D length, dip, and c-axis angle were in excellent agreement, with slightly less dispersion when using the 5.5 M etch. Lengths were shorter in the 5.0 M etched mount than the 5.5 M etched one, which we interpret to be caused by more prevalent under-etching in the former, at least for some apatite compositions. After an additional 5 s of etching, 5.0 M tracks saw greater lengthening and more reduction in dispersion than 5.5 M tracks, additional evidence that they were more likely to be under-etched after the initial etching step. Systematic differences between analysts were minimal, with the main exception being likelihood of observing tracks near perpendicular to the crystallographic c axis, which may reflect different use of transmitted vs. reflected light when scanning for tracks. Etch figure measurements were more consistent between analysts for the 5.5 M etch, though one apatite variety showed high dispersion for both. Within a given etching protocol, each sample reflected a decrease of mean track length with time since irradiation, giving evidence of 0.2–0.3 μm of annealing over year to decade timescales.

16 June 2025 in Gondwana Research
Verified
Journal Article
Open access
IKIlmo T. Kukkonen
Ilmo T. Kukkonen
BKBarry Kohn
Barry Kohn
KKKalle Kirsimäe
Kalle Kirsimäe
AJArgo Jõeleht
Argo Jõeleht
LCLing Chung
Ling Chung
AGAndy Gleadow
Andy Gleadow

11 September 2021 in ESS Open Archive
Verified
Preprint
Open access
MTMurat Tamer
Murat Tamer
LCLing Chung
Ling Chung
RKRichard Ketcham
Richard Ketcham
AGAndrew Gleadow
Andrew Gleadow
Factors influencing data reproducibility of fission-track (FT) thermochronology can be summarized into three main categories associated with data acquisition steps. (1) Sample preparation involves mineral separation, mounting, polishing and etching; (2) data revelation relates to instrumentation (microscope, LAICPMS, etc.) and software settings; and (3) execution depends on feature selection by the analyst. Previous committee reports and studies (Hurford A.J. 1990; Ketcham et al. 2009; Ketcham et al. 2015; Ketcham et al. 2018) have contributed significant insights into the reproducibility of fission-track data by comparing length and age measurements produced by several laboratories using their own preparation and revelation procedures. A recent attempt to isolate analyst-specific factors in length measurement using an image-based approach (Tamer et al. 2019) found that when two analysts observe the same feature and agree it is a valid track, measurement reproducibility was very good, though impacted by etching. Dispersion of individual length measurements was 0.7-1.0 µm (2 for weaker etching and 0.5-0.8 µm for stronger etching, but mean lengths were always within 0.1 µm of each other. Where the analysts disagreed more significantly, however, was in finding tracks and evaluating whether they were valid, sufficiently clear, and sufficiently etched for measurement, which led to differences of up to ~0.8 µm in mean track length. This study builds on the image-based approach to encompass more aspects of the measurement process and increase the number of analysts being compared. We will look at confined track selection in greater detail, and also study analyst decisions behind age determination, including the selection of the region of interest for counting, and identification of grain-surface features as tracks appropriate for counting. Reflected and transmitted light image stacks for 41 grains and graticules are available on a cloud platform Participants will carry out analyses of these images using their preferred approach, e.g. suitable analytical software, manual measurements or AI-based analysis. A limited license for FastTracks (v3.2) will be available for those who would like to participate but do not have measurement software. Analysts are asked to fill out a questionnaire about their fission track experience, conduct track density estimations, confined track length and Dpar measurements, and especially provide comments on all grains being analyzed or skipped. FastTracks users are asked to send the .xml files produced by the software, while other participants are asked to submit the results using a template. The results will be entirely anonymous unless the analyst states otherwise. The deadline for the submission of the results is June 1st, 2022. The results will be shared on 18th International Conference on Thermochronology.

5 September 2021 in ESS Open Archive
Verified
Preprint
Open access
MTMurat Tamer
Murat Tamer
LCLing Chung
Ling Chung
RKRichard Ketcham
Richard Ketcham
AGAndrew Gleadow
Andrew Gleadow
Factors influencing data reproducibility of fission-track (FT) thermochronology can be summarized into three main categories associated with data acquisition steps. (1) Sample preparation involves mineral separation, mounting, polishing and etching; (2) data revelation relates to instrumentation (microscope, LAICPMS, etc.) and software settings; and (3) execution depends on feature selection by the analyst. Previous committee reports and studies (Hurford A.J. 1990; Ketcham et al. 2009; Ketcham et al. 2015; Ketcham et al. 2018) have contributed significant insights into the reproducibility of fission-track data by comparing length and age measurements produced by several laboratories using their own preparation and revelation procedures. A recent attempt to isolate analyst-specific factors in length measurement using an image-based approach (Tamer et al. 2019) found that when two analysts observe the same feature and agree it is a valid track, measurement reproducibility was very good, though impacted by etching. Dispersion of individual length measurements was 0.7-1.0 µm (2 for weaker etching and 0.5-0.8 µm for stronger etching, but mean lengths were always within 0.1 µm of each other. Where the analysts disagreed more significantly, however, was in finding tracks and evaluating whether they were valid, sufficiently clear, and sufficiently etched for measurement, which led to differences of up to ~0.8 µm in mean track length. This study builds on the image-based approach to encompass more aspects of the measurement process and increase the number of analysts being compared. We will look at confined track selection in greater detail, and also study analyst decisions behind age determination, including the selection of the region of interest for counting, and identification of grain-surface features as tracks appropriate for counting. Reflected and transmitted light image stacks for 41 grains and graticules are available on a cloud platform for download from the following link: https://drive.google.com/drive/folders/1yUp4bqtEag5wc8CJNG0M20nKDidWCHnQ?usp=sharing. Participants will carry out analyses of these images using their preferred approach, e.g. suitable analytical software, manual measurements or AI-based analysis. A temporary license for FastTracks (v3.2) will be available for those who would like to participate but do not have measurement software. To obtain the FastTracks (v3.2) with a temporary license, please contact Ling Chung at ling.chung@unimelb.edu.au. Analysts are asked to fill out a questionnaire about their fission track experience, conduct track density estimations, confined track length and Dpar measurements, and especially provide comments on all grains being analyzed or skipped. FastTracks users are asked to send the .xml files produced by the software, while other participants are asked to submit the results using a template. The results will be entirely anonymous unless the analyst states otherwise. The deadline for…

6 August 2026 in Earth and Planetary Science Letters
Verified
Journal Article
Open access
AFAlessandra Flaherty
Alessandra Flaherty
LCLing Chung
Ling Chung
BKBarry Kohn
Barry Kohn
KFKenneth Farley
Kenneth Farley