1 January 2021 in Advances in Materials Science and Engineering
In the present study, ethylene‐vinyl acetate (EVA) and crumb rubber (CR) were used as bitumen modifiers. The experiment was designed by response surface methodology (RSM) at different levels of modifier additives based on the central composite design (CCD). Next, the Superpave protocol was followed to evaluate the modified bitumen performance at different temperatures compared with the unmodified bitumen. In this regard, to evaluate at high temperatures, a dynamic shear rheometer (DSR) test was performed, and G∗/sinδ index was examined on bitumen samples after aging. Besides, the bending beam rheometer (BBR) test was performed to evaluate the low‐temperature behaviour of the modified bitumen according to the SHRP standard based on the creep stiffness and creep rate. The optimal combination of additives was evaluated using RSM and analysis of statistical values to improve the performance properties of bitumen at high and low temperatures. Moreover, based on the DSR and BBR test results, 5.6% of EVA and 3.9% of CR were selected as the optimal values for the modified bitumen behaviour at the high and low temperatures of the mixture.
8 April 2022 in Petroleum Science and Technology
SGSaeed Sadeghpour Galooyak
Saeed Sadeghpour Galooyak
Selecting the optimum amount of modifiers added to bitumen to modify its characteristics has always been one of the most important steps of such researches. In this study, the response surface method is used to design the experiments and to determine the optimal combination of different percentages of waste LDPE and crumb rubber. Waste LDPE in the amounts of 3%, 5%, and 7% and crumb rubber in the amounts of 1%, 3%, and 5% are used as the modifiers. In addition, the central composite design method is used to select the optimal combination of waste LDPE and crumb rubber. Polymer percentage is the most effective parameter in this research. The results show an optimum point of approximately 3% waste LDPE and 3% rubber powder. It can be the optimal point and has the best performance at low temperatures in this combination of modified bitumen percentages. However, the exact optimal point is obtained as 3% recycled plastic and 2.02% rubber powder after the optimization process.