Fatma A. Morsy

Fatma A. Morsy

Auto-generated profile, based on publicly available information

Fatma A. Morsy

Helwan University

Research Focus & Metrics

Academic Career Length

32Years (1995-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 March 2013 in Applied Nanoscience
Verified
Journal Article
Open access
PDF file
SESamya El-Sherbiny
Samya El-Sherbiny
FMFatma Morsy
Fatma Morsy
MSMarwa Samir
Marwa Samir
Osama FouadOsama Fouad
Osama Fouad
TiO2 nanopigments in two pure crystallographic forms (anatase and rutile) have been synthesized successfully by two methods; hydrothermal and hydrolysis. The produced pigments from the two methods were investigated physicochemically by several analyses tools. Then they were applied in paper coating mixtures and their influence on coated paper properties was systematically investigated. XRD and FTIR investigations showed that the prepared pigments using hydrothermal method at 100 and 120 °C were a mixture of anatase and brookite and pure anatase, respectively, whereas hydrolysis method produced pure rutile phase pigment. TEM investigation showed that the crystallite size of anatase, mixture of anatase and brookite and rutile samples are 6.2, 11.7, and 9.2 nm, respectively. BET studies proved that anatase pigment has 140.74 m2/g, 0.237 cc/g and 18.33 Å, whereas rutile has 60.621 m2/g, 0.122 cc/g and 14.669 Å, surface area, pore volume and pore diameter, respectively. UV–Vis absorption and PL emission characteristics of the prepared pigments showed that the energy gaps for anatase, mixture of anatase and brookite and rutile are 3.36, 3.30 and 3.37 eV, respectively. The addition of the prepared nanopigments in conjugation with clay in coating mixture increased both brightness and opacity of the coated papers. The greatest effect was obtained upon using rutile nanopigment. Also there was a significant decrease in coated paper roughness while the air permeance started to decrease then increased at 50 % addition levels. In all coated paper, rutile pigment showed the highest enhancement effect on coated paper properties.

1 September 2014 in Powder Technology
Verified
Journal Article
Closed access
FMFatma A. Morsy
Fatma A. Morsy
SESamya El-Sherbiny
Samya El-Sherbiny
MHMervat S. Hassan
Mervat S. Hassan
HMHeba F. Mohammed
Heba F. Mohammed

1 November 2019 in Arabian Journal of Chemistry
Verified
Journal Article
Open access
FMFatma Morsy
Fatma Morsy
SESaid M. El-Sheikh
Said M. El-Sheikh
Ahmed BarhoumAhmed Barhoum
Ahmed Barhoum
Silica (SiO2) nanoparticles and silica/calcium carbonate (SiO2/CaCO3) core–shell nanocomposites were prepared by sol–gel technique as fillers for papermaking application. Semi-burned rice straw ash (SBRSA), as waste material, was used to prepare the targeted fillers. Preparation of SiO2 nanoparticles and SiO2/CaCO3 nanocomposites was carried out using Na2SiO3 solution that was prepared from SBRSA and CaCO3 nanoparticles of 30–70 nm. The targeted SiO2/CaCO3 nanocomposites were prepared with different molar ratio of SiO2:CaCO3 1:15, 1:10 and 1:5. The percentage of silica increased from 62.5% to 82.9% by thermal treatment of SBRSA at 800 °C for 2 h. The prepared SiO2 nanoparticles and SiO2/CaCO3 nanocomposites were characterized by using XRD, XRF, TEM, FT-IR and Zeta potential. The results indicate that a pure semi-crystalline SiO2 nanoparticle and semi-crystalline shell of SiO2 coated CaCO3 core particles were produced. The work extended also to investigate the effect of the prepared fillers on physical, mechanical and optical properties of paper. Application of the prepared SiO2 nanoparticles and SiO2/CaCO3 nanocomposites improved the optical properties of paper (brightness, whiteness and opacity) but it slightly reduced the mechanical properties when compared to commercial precipitated CaCO3 (PCC) filler. The results showed that the retention of SiO2 nano-particles was highly increased. The retention of the prepared nanocomposites increased along with increasing of SiO2:CaCO3 molar ratio.

1 August 2002 in Pigment & Resin Technology
Verified
Journal Article
Closed access
SES. Elsayad
S. Elsayad
FMF. Morsy
F. Morsy
SES. El‐Sherbiny
S. El‐Sherbiny
EAE. Abdou
E. Abdou
Many factors affect the print quality and ink transfer. These are either machine factors, paper factors, or Ink factors. The aim of this work was to find out to what extent are the amount of ink transferred influenced by the previously mentioned factors. Atomic absorption was used for quantitatively measuring the amount of ink transferred. Copper phthalocyanine pigment was chosen. The amount of copper detected is taken as an indication of the amount of ink transferred. The results indicated that the amount of ink transferred decreased as the printing speed increased. It was expected to be increased with increasing printing pressure. But It was found that the amount of ink transferred to supercalendered paper decreased with increasing printing pressure. The amount of ink transferred increased as the ink viscosity increased. The type of ink resin was found to have a considerable effect on the amount of ink transferred.

1 November 2019 in Arabian Journal of Chemistry
Verified
Journal Article
Open access
SESaid M. El-Sheikh
Said M. El-Sheikh
Ahmed BarhoumAhmed Barhoum
Ahmed Barhoum
SESamya El-Sherbiny
Samya El-Sherbiny
FMFatma Morsy
Fatma Morsy
AEAyman Abdel-Hamid El-Midany
Ayman Abdel-Hamid El-Midany
HRHubert Rahier
Hubert Rahier
Superhydrophobic nanocalcite crystals were prepared via an adjusted aqueous reaction of CaO, CO2 gas and sodium oleate. Box–Behnken design was used to optimize the preparation parameters such as CaO concentration, CO2 gas flow rate and surfactant concentration. The results revealed that the produced CaCO3 is indexed to the calcite phase. The crystallite size, particle size, morphology, hydrophobicity and surface charge of CaCO3 are significantly affected by changing the preparation parameters. The addition of sodium oleate helps in reducing the crystallite size from 101nm to 48nm, reducing the particle size from 1.5μm length scalenohedral particles to 40nm rhombohedral particles and modifying the properties of pure CaCO3 from highly hydrophilic to superhydrophobic

1 January 2015 in Journal of Chemistry
Verified
Journal Article
Open access
PDF file
AAAyman Atta
Ayman Atta
RER A Elghazawy
R A Elghazawy
FMFatma A Morsy
Fatma A Morsy
AHAli Hebishy
Ali Hebishy
AEAbdullah Elmorsy
Abdullah Elmorsy
The present work has main target to study the effect of additives molecular weight and composition on the flow characteristics of wax crude oil at low temperature below pour point temperature. In this respect, maleic anhydride ester‐co‐vinyl acetate copolymers with varied monomers feed ratios and different alkyl ester lengths, namely, dodecyl, stearyl, and behenyl alkyl chains, were prepared. These polymeric materials were characterized by FTIR, 1 HNMR, and GPC. The performance of these additives as pour point depressants and flow improver for Egyptian waxy crude oil was evaluated through measurements of pour point and rheological parameters (viscosity and yield stress). It was observed that stearyl maleate‐vinyl acetate copolymer with 1 : 2 feed ratio shows the best efficiency as pour point depressant even at low concentration while octadecyl maleate‐vinyl acetate copolymers with 2 : 1 feed ratio are effective as flow improver.