18 July 2022 in IEEE Photonics Journal
In this paper, we propose a novel ultrafast laser with nanostructure CH 3 NH 3 PbI 3 nanorods, yielding a higher modulation depth and lower optical loss. Our experiment is performed through nanopatterned CH 3 NH 3 PbI 3 rods and an all-solid-state passive mode-locked laser system. The prepared nanoarray CH 3 NH 3 PbI 3 perovskite exhibits a modulation depth of 8.1% under a saturation intensity of 9.53 MW/cm 2 . By applying the CH 3 NH 3 PbI 3 nanoarray as a saturable absorber in the ultrafast 1064-nm laser system, a mode-locked pulse with a 30-ps pulse width and an 87.3-MHz repetition rate is achieved. A maximum output power of 542 mW was measured, under an absorption pump power of 5.4 W. With the new structured CH 3 NH 3 PbI 3 , our experiment verifies a new method in ultrafast lasers with low light loss, which potentially uncovers an avenue to develop ultrafast lasers.
21 June 2018 in IEEE Photonics Technology Letters
ZnS quantum-dots (QDs) based solar-blind ultraviolet (UV) photodetectors were fabricated by a solution based process without annealing. The cubic ZnS QDs have an average particle size of 2.29 nm, measured by transmission electron microscopy; the bandgap was found to be 4.11 eV ( 3.68 eV for bulk cubic ZnS), determined by photoluminescence excitation measurement. The photodetector shows a cut-off at 300nm; for shorter wavelengths the responsivity is found to increase linearly from 300nm to 254 nm; a photosensitivity of 8, responsivity of 1.60 mA/W and detectivity of 5.51×109 cm Hz1/2 W–1 were obtained at 254 nm, when operated at a bias voltage of 15 V.
11 July 2017 in IEEE Electron Device Letters
Dual-gate InGaZnO thin-film-transistors were fabricated to demonstrate their feasibility as phototransistors by fully exploiting the perovskite quantum dots (QDs) with superior quantum yield. Here, we show that by coupling the top-gate photo sensing polymethyl methacrylate (PMMA)/CsPbBr 3 QDs hybrid insulator with the classic SiO 2 bottom-gate insulator, the phototransistor can exhibit a combination of excellent detective performance (3.75 × 10 12 Jones detectivity and 1 × 10 3 A/W responsivity) and electrical performance (small 3-V threshold voltage, 0.53-V/decade substhreshold slop, and 0.1-V hysteretic threshold voltage's shift). Additionally, this dual-gate phototransistor exhibits high stability and accelerated detecting speed (<;100 μs) due to the inorganic perovskite QDs/PMMA hybrid gate insulator. Our results suggest that in a proper device architecture, perovskite nanomaterials can be promising candidates for cost-effective, high-performance phototransistor.
11 July 2024 in IEEE Photonics Journal
The identification and categorization of pills constitute critical tasks within a contemporary hospital, particularly for avoiding medication errors. Conventional approaches to visual recognition and classification predominantly rely on visible light imagery, proving inadequate for discerning white pills with similar visual characteristics. However, white pills exhibit distinctive infrared properties across various spectral bands. Building upon these observations, this paper introduces the MCIR-YOLO algorithm, a multi-band infrared image object detection system, which enhances the YOLOv5s model through multimodal fusion techniques. This study presents a novel dataset comprising IR images of white round pills captured across six channels, with peak wavelengths ranging from approximately 1400 nm to 1650 nm. Furthermore, a multimodal fusion strategy is proposed, facilitating multi-level feature integration across the six IR channels. This fusion technique exploits the scale features inherent to each IR modality, thereby enabling comprehensive information fusion across multiple modalities. Additionally, the model incorporates an auxiliary detection branch, independent of the backbone, which utilizes fused feature information to calculate a distinct loss, effectively mitigating overall loss. Attention mechanism modules are integrated after two distinct fusion points to enhance feature precision. Leveraging mean and scaling of IR features, these attention mechanisms significantly boost detection accuracy. Experimental results demonstrate that the improved model outperforms the baseline YOLOv5s model, particularly evident in a self-constructed dataset of white round pill IR images, where mAP0.5 increased by 5.47% and 7.96% for single-channel (peak at 1650 nm) and six-channel configurations, respectively. Notably, the utilization of the MCIR-YOLO model for six-channel recognition yields a substantial advantage of 12.05% over the best-performing single-channel IR image recognition.