Aiming at the risk of electricity theft of wireless power transfer (WPT) technology due to its untargeted and non-directional characteristics, a novel method of identification and resonance decoupling based on frequency hopping communication is proposed. The basic principle of the identification method is to make the resonant frequency of transmitter coil and receiver coil jump synchronously and randomly according to the pseudo-random code sequence, which can identify the load in single-source single-user mode and single-source multi-user mode respectively by calculating energy consumption ratio. And if user is illegal, then the resonant frequency of system jumps randomly to cut off the power, which is named resonance decoupling. The experimental circuit is designed on the basis of theoretical analysis and the method is verified. The test results are consistent with theoretical analysis, which has proved the validity of the method. This paper not only provides a solution to the power management of WPT system, but also is a support for the measurement of electricity, moreover, it is conducive to the further application and promotion of WPT technology.
24 May 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
In order to avoid catastrophic accidents, it is necessary to detect the stator interturn fault at the very early stage. However, the complex operating conditions of traction motors of urban rail vehicles bring challenges to real-time fault feature extraction and highly sensitive fault detection. In this paper, a new online stator interturn fault detection method is proposed. Firstly, fault feature extraction from transient current signals is realized by modified Hilbert transform. In addition, considering the difficulty of threshold calibration under complicated operating conditions and the lack of actual fault samples in application, an automatic fault identification approach based on artificial neural network model which is trained only utilizing healthy data is proposed. In this paper, a 210-kW traction induction motor of metro vehicle is taken as the research object, and the existing traction control unit is used as the implementation platform of algorithm. The results illustrate the effectiveness and feasibility of the proposed approach in application.
Recently, in order to ensure the reliability and safety of trains, online condition monitoring and fault diagnosis of traction induction motors have become active issues in the area of rail transportation. The fault diagnosis algorithm can be developed and debugged in a real-time environment based on hardware-in-the-loop simulation (HILS). However, the dynamic space model of induction motors with stator interturn short-circuit faults faces the problem that the faulty state and the healthy state are not compatible, which is inconvenient for the HILS. In this paper, a fault injection model is proposed for the first time, which can realize the online switching between the healthy state and the faulty state of the motor. The feasibility and effectiveness of the proposed model are verified by simulation experiments the based on MATLAB/Simulink and dSPACE HILS platforms.