12 December 2018 in Eastern-European Journal of Enterprise Technologies
Design of linear capillary measuring transducers for low gas flow rates
30 December 2024 in Metrology and Measurement Systems
Modern devices for dynamic calibration of pressure sensors (shock tubes, power simulators of pressure impulse, etc.) have a number of drawbacks stemming from the principles of creating a test impact. Besides, the problem of rational choice of the method of calibrating pressure sensors depending on the dynamic parameters of the sensor and the required test accuracy has not been solved for modern test systems. The paper presents a solution to the problem of correlation between the test parameters, dynamic parameters of the pressure sensor and test accuracy. The obtained analytical dependencies of such a relationship make it possible to reasonably select or develop a method for studying the dynamic characteristics of sensors. Based on theoretical studies, the principle of creating a test impact has been proposed, and a method and device for implementing dynamic calibration of pressure sensors have been devised. The developed device allows the transient response of the sensor to be obtained, as well as setting the decay time of its natural vibration. Based on the transient response, other dynamic characteristics of the sensor, namely the impulse transient and frequency response, can be calculated.
1 March 2017 in Metrology and Measurement Systems
The theoretical aspects of a new type of piezo-resistive pressure sensors for environments with rapidly changing temperatures are presented. The idea is that the sensor has two identical diaphragms which have different coefficients of linear thermal expansion. Therefore, when measuring pressure in environments with variable temperature, the diaphragms will have different deflection. This difference can be used to make appropriate correction of the sensor output signal and, thus, to increase accuracy of measurement. Since physical principles of sensors operation enable fast correction of the output signal, the sensor can be used in environments with rapidly changing temperature, which is its essential advantage. The paper presents practical implementation of the proposed theoretical aspects and the results of testing the developed sensor.
13 February 2018 in Eastern-European Journal of Enterprise Technologies
Based on dependences that describe the nonstationary temperature fields in the membrane and casing of the tensoresistive pressure sensor, we derived equations for thermomechanical processes in these elements, specifically equations of thermal deformation and thermal stresses. These equations make it possible to explore the effect of a thermal deflection in the membrane, as well as thermal stresses and thermal deformations in it, on the static and dynamic characteristics of the sensor.It is shown that the combination of thermal elastic processes in the membrane under a fast-changing effect of temperature on it significantly distorts the static and dynamic characteristics. It was established that during thermal deflection relative deformations on the surface of the membrane can be commensurate with the working deformations during pressure measurement, while a transitional characteristic of the sensor may differ from normal by up to 60 %.Our research shows that it is possible, when enabling radial thermal deformation, synchronized with the membrane of the sensor's casing, in the region of coupling with the membrane, to minimize thermal stresses in it. In addition, by minimizing the heat transfer along the perimeter of the sensor's membrane it is possible to eliminate the gradient of a temperature field along the radius. This is the way to minimize a thermal deflection of the membrane and decrease a temperature error of the sensor. Employing such measures may substantially reduce the influence of a fast-changing temperature on metrological characteristics of the sensor.
18 February 2019 in Eastern-European Journal of Enterprise Technologies
Construction and investigation of a method for measuring the non-stationary pressure using a wavelet transform