The liquid-phase exfoliation of tin(II) sulfide to produce SnS nanosheets in N-methyl-2-pyrrolidone is reported. The material is characterized by Raman spectroscopy, atomic force microscopy, lattice-resolution scanning transmission electron microscope imaging, and energy dispersive X-ray spectrum imaging. Quantum chemical calculations on the optoelectronic characteristics of bulk and 10-layer down to monolayer SnS have been performed using a quantum chemical density functional tight-binding approach. The optical properties of the SnS and centrifugally fractionated SnS nanosheet dispersions were compared to that predicted by theory. Through centrifugation, bilayer SnS nanosheets can be produced size-selectively. The scalable solution processing of semiconductor SnS nanosheets is the key to their commercial exploitation and is potentially an important step toward the realization of a future electronics industry based on two-dimensional materials.
25 August 2016 in ACS Applied Materials & Interfaces
We report the electrochemical detection of the redox active cardiac biomarker myoglobin (Mb) using aptamer-functionalised black phosphorus nanostructured electrodes by measuring direct electron transfer. The as-synthesised few layer black phosphorus nanosheets have been functionalised with poly-L-lysine (PLL) to facilitate binding with generated anti-Mb DNA aptamers on nanostructured electrodes. This aptasensor platform has a record-low detection limit (~0.524 pg mL-1) and sensitivity (36 µA pg-1 mL cm-2) towards Mb with a dynamic response range from 1 pg mL-1 to 16 µg mL-1 for Mb in serum samples. This strategy opens up avenues to bedside technologies for multiplexed diagnosis of cardiovascular diseases in complex human samples.
A new wet chemistry approach, based on the hot-injection–thermolytic decomposition of the single-source precursor [Mo2O2S2(S2COEt)2] in oleylamine, is described for the production of nanodimensional 1H-MoS2@oleylamine. High quality freestanding MoS2 nanosheets capped with oleylamine have been prepared and subjected to detailed compositional analyses for the first time. The selection of the appropriate reaction temperatures (200–325 °C) in the simple yet robust procedure allows control of the lateral nanosheet dimensions which range from 4.5 to 11.5 nm, as 1H-MoS2@oleylamine entities which maintain a consistent chemical composition (MoS2·oleylamine0.28–0.33). This work provides the first example of atomic resolution STEM imaging of these fine-scale nanosheet materials, providing new insights into their morphology and demonstrating that those freestanding MoS2 nanosheets are pure, highly crystalline, randomly oriented monolayers. The 1H-MoS2@oleylamine samples were analyzed by attenuated total reflectance FT-infrared spectroscopy (ATR-FTIR), transmission electron microscope (TEM) imaging, aberration corrected scanning transmission electron microscope (STEM) imaging, energy dispersive X-ray (EDX) spectrum imaging, powder X-ray diffractometry (p-XRD), thermogravimetric analysis (TGA), and Raman spectroscopy. Composite materials of the as-synthesized MoS2 nanosheets and exfoliated graphene were then used to construct coin-cell supercapacitor electrodes with a specific capacitance of 50 mF/cm2, demonstrating its utility as an energy storage material.
23 November 2012 in Angewandte Chemie International Edition
A combined single-source precursor approach has been developed for the deposition of thin films of Cr-doped molybdenum disulfide (MoS2) by aerosol-assisted chemical vapor deposition (AACVD). Tris(diethyldithiocarbamato)chromium(III) can also be used for the deposition of chromium sulfide (CrS). Films have been analyzed by a range of techniques including scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy, Raman spectroscopy, and powder X-ray diffraction (pXRD) to elucidate film morphology, composition, and crystallinity. The presence of Cr in the MoS2 films produces a number of striking morphological, crystallographic, and nanomechanical changes to the deposited films. The chromium dopant appears to be uniform throughout the MoS2 from the scanning transmission electron microscopy (STEM) EDX spectrum imaging of nanosheets produced by liquid-phase exfoliation of the thin films in N-methyl-2-pyrollidone.