2 July 2019 in IEEE Transactions on Antennas and Propagation
A novel method of designing the frequency selective structure (FSS) with transmission and scattering deflection based on spoof surface plasmon polariton (SSPP) modes is proposed and demonstrated in this paper. High-efficiency transmission based on SSPP modes coupling can be achieved below the cut-off frequency using the metallic fishbone structure (MFS). As the composed blade length is varied, the dispersion of the SSPP mediated on the MFS keeps almost unchanged in the low frequency band while has an obvious change in the high frequency band. Therefore, the FSS with transmission and scattering deflection can be achieved by a reflection-type coding metamaterial using the MFS. To verify this idea, the FSS was simulated, fabricated and measured. Under linearly polarized waves normal incidence, the transmissivity of the FSS exceeds −0.8dB below the frequency ƒ=9.5GHz. In the stopband, the RCS reduction is higher than 10dB from 14.4GHz to 18.0GHz, which results from the anomalous reflection due to the 1-bit 0101/1010 coding sequence. The FSS with transmission and scattering deflection based on SSPP modes can be applied to the electromagnetic windows of vessels.
8 February 2019 in Journal of Physics D: Applied Physics
A method of engineering the frequency selective structure with absorption and transmission based on spoof surface plasmon polariton (SSPP) modes is proposed and demonstrated in this paper. High-efficiency transmission can be achieved based on SSPP modes coupling. Due to the electric field enhancement effect of the coupled SSPP on the metallic blade array, high-efficiency absorption can be achieved by the high loss of the FR4 dielectric substrate. To verify this method, the absorption-transmission-integrated frequency selective structure was designed using the metallic trapezoid structure, metallic fishbone structure and FSS. The metallic trapezoid structure can absorb the low frequency electromagnetic (EM) waves and the metallic fishbone structure can absorb the high frequency EM waves. Two absorption bands are respectively in C and Ku bands. The FSS can modulate the passband characteristic of the metallic trapezoid structure and metallic fishbone structure. High-efficiency transmission can be achieved in the middle of two absorption bands. At last, the absorption-transmission-integrated frequency selective structure was fabricated and measured to verify the feasibility of this method. It can be used for the electromagnetic windows of vessels.