19 February 2014 in Applied Physics B
30 January 2021 in Frontiers of Information Technology & Electronic Engineering
We demonstrate the generation of noise-like pulses (NLPs) and soliton rains in a graphene saturable absorber mode-locked erbium-doped fiber laser. Typical
1 February 2013 in Optical Materials
23 February 2015 in Applied Optics
We report on the high-power and efficient operation of a Ho:YAG laser wing-band-pumped by a Tm:fiber laser at 1933 nm. Using an output coupler of 10% transmission, maximum continuous-wave (CW) output power of 24.2 W at 2124 nm was generated under 42.6 W of absorbed pump power, corresponding to slope efficiency with respect to absorbed pump power of 57.6%. The operating wavelength of the Ho:YAG laser centered at 2092 or 2124 nm depending on different resonator designs. Prospects for further improvement in laser performance with this wing-pump configuration are discussed.
4 October 2017 in Advances in Condensed Matter Physics
We report a high-power cladding-pumped Er,Yb codoped all-fiber laser with truly single transverse mode output. The fiber laser is designed to operate at 1545 nm by the use of a pair of fiber Bragg gratings (FBGs) to lock and narrow the output spectrum, which can be very useful in generating the eye-safe ~1650 nm laser emission through the Stimulated Raman Scattering (SRS) in silica fibers that is of interest in many applications. Two pieces of standard single-mode fibers are inserted into the laser cavity and output port to guarantee the truly single-mode output as well as good compatibility with other standard fiber components. We have obtained a maximum output power of 19.2 W at 1544.68 nm with a FWHM spectral width of 0.08 nm, corresponding to an average overall slope efficiency of 31.9% with respect to the launched pump power. This is, to the best of our knowledge, the highest output power reported from simple all-fiber single-mode Er,Yb codoped laser oscillator architecture.
31 August 2023 in Optics Express
In this study, we theoretically and experimentally demonstrate that the convolutional neural network (CNN) in combination with the residual blocks and the regression methods can be used to precisely and quickly reconstruct the OAM spectrum of a hybrid OAM mode no matter how the consistent OAM modes have the same or different order indices in both the azimuthal and the radial direction. For cases of the simulation testing, the mean errors of all recognized parameters for hybrid OAM modes in a four-mode fiber (4MF) and a six-mode fiber (6MF) are smaller than 0.003 and 0.008, respectively. To the best of our knowledge, this is the first time that all the OAM modes, probably existing in the core of 4MFs or 6MFs, can be precisely and quickly recognized from intensity distribution of the hybrid OAM mode itself via the deep learning method.