9 March 2012 in Journal of Materials Chemistry
Low dielectric polybenzoxazine nanocomposites (SBA-15/PBZ) containing mesoporous silica (SBA-15) were successfully synthesized, using benzoxazine functionalized SBA-15 (BZ/SBA-15) and benzoxazine monomer, through thermal ring opening polymerization. SBA-15 was functionalized with benzoxazine functional silane via grafting method. The benzoxazine functionality in BZ/SBA-15 was confirmed by FT-IR, 13C CPMAS, 29Si CPMAS NMR, XPS, TGA and nitrogen porosimetry analysis. By increasing the amount of BZ/SBA-15, the SBA-15/PBZ nanocomposites possess higher Tg and good thermal stability. 7.5 Wt % of BZ/SBA-15 reinforced polybenzoxazine nanocomposite possesses an ultra-low dielectric constant of 1.75 at 1 MHz.
27 April 2015 in Applied Physics Letters
In 2001, Dozov predicted that twist-bend nematic phase can be spontaneously formed when K33 < 0 and K11/K22 > 2, and this phase has recently been discovered in bimesogens. To verify Dozov's hypothesis, we have measured precisely the temperature dependence of the elastic constants of CB7CB in the entire temperature range of nematic phase and in twist-bend nematic phase close to the transition temperature by combing the Fréedericksz threshold methods for a twist nematic and an in-plane switching cells. Anomalous changes in K22 and K33 are observed across the phase transition. The elasticity estimated via extrapolation of the data in the high temperature region of the nematic phase seems to fully satisfy Dozov's hypothesis although the elasticity data in the vicinity of the phase transition exhibit opposite trends. This can be explained by the general nature of a hierarchical system where the macroscopic elasticity is governed mostly by the distortion of a higher level structure.
5 March 2012 in High Performance Polymers
Polyhedral oligomeric silsesquioxane (POSS) – polyimide (PI) hybrid nanocomposites were prepared by a two-step approach, bisphenol-A ether diamine (BAED) and pyromelletic dianhydride (PMDA) in 1-methyl-2-pyrrolidone (NMP) were used to prepare polyamic acid (PAA) to which varying weight percentages of OAPS in NMP were added. During the second step, the polycondensation was effected by thermal imidization. The formation of hybrid nanocomposites was confirmed by using FTIR spectra. The thermal properties of POSS-PI nanocomposites were studied using differential scanning calorimetry and thermogravimetric analysis. The lowest dielectric constant 2.68 was achieved for 15 wt.% POSS-PI material when compared with the value of 3.34 for the neat PI. Data from thermal studies indicate that the incorporation of POSS into polyimide significantly enhanced the glass transition temperature ( Tg), thermal stability, char yield and flame-retardant properties of hybrid nanocomposites than that of neat PI. The excellent combination of both dielectric and thermal properties of the material developed in the present study will find application in microelectronics.
1 February 2019 in Electrochimica Acta
14 January 2014 in RSC Advances
Degradation against atomic oxygen (AO), ultra-violet (UV) and vacuum ultra-violet (VUV) radiation has to be controlled in order to maintain the longevity and performance of light weight and high strength nanocomposites used in space and nuclear applications. With this in mind, a new synthetic route has been used to develop a semi-organic precursor, [polyhedral oligomeric silsesquioxane (POSS)] reinforced polybenzoxazine/epoxy (PBZ/EP) nanocomposites. PBZ/EP/POSS nanocomposites have been developed by reinforcing varying weight percentages of (0, 1.0, 3.0, and 5.0 wt%) POSS into 1 : 1 (w/w) ratio of BZ and DGEBA epoxy (EP) matrix via thermal curing. The developed nanocomposites were tested under UV irradiation at the wavelength of 365 nm for a period of one week. The values of tensile strength and morphological behaviour before and after exposure to UV irradiation have been determined in order to assess their radiation resistant behaviour. It was ascertained that the data obtained from the value of tensile strength for 5 wt% POSS reinforced PBZ/EP has changed only to an insignificant extent when compared to that of before UV irradiation. From SEM and XPS analysis, it was observed that a passive inert silica protective layer has been formed after radiation, which protects the composite materials from further deterioration due to radiation. Data from thermal and dielectric studies indicate that the POSS incorporated system possesses better thermal and low dielectric properties than those of the neat PBZ/EP matrix.
13 October 2011 in Polymer Composites