We report the generation of an optical frequency comb featuring a 28 THz bandwidth, sustained by a single 80 fs cavity soliton recirculating in a fiber Fabry–Pérot resonator. This large spectrum is comparable to frequency combs obtained with microresonators operating in the anomalous dispersion regime. Thanks to the compact design and the easy coupling of the resonator, cavity solitons can be generated in an all-fiber experimental setup with a continuous wave pumping scheme. We also observe the generation of a dispersive wave at higher frequencies, which is supported by higher-order dispersion. These observations align remarkably well with both numerical simulations and the established theory of cavity solitons.
We report the generation of a stable, broadband frequency comb, covering more than 10 THz, using a dispersion fiber Fabry-Perot resonator with a high quality factor of 69 millions. This platform ensures robust and easy integration into photonic devices via FC/PC connectors, and feature quality factors comparable to those of microresonators. We demonstrate a passive mode-locking phenomenon induced by the coherent interaction of the Kerr effect and Brillouin scattering, which generates a frequency comb with a repetition rate exceeding the free spectral range of the cavity. This parametric process modulates the continuous wave (CW) pump and can then be transformed into a train of almost square-wave pulses thanks to the generation of switching waves. Our results are supported by advanced numerical simulations, and theoretical derivations that include the Brillouin effect in the Fabry-Perot configuration. The very high stable feature of this optical frequency comb lying in the GHz range is critical to several applications ranging from telecommunication, spectroscopy and advanced microwave generation.
We report the generation of broadband frequency combs in fiber Fabry-Perot resonators in the normal dispersion regime enabled by the excitation of switching waves. We theoretically characterize the process by means of a transverse linear stability analysis of the Lugiato-Lefever equation, enabling precise prediction of the switching waves' frequencies. Experimentally, we employ a pulsed-pump fiber Fabry-Perot resonator operating in the normal dispersion regime, integrated into an all-fiber experimental setup. The synchronization mismatch and the influence of dispersion are thoroughly discussed, unveiling the potential to generate a frequency comb spanning over 15 THz bandwidth, specifically leveraging a flattened low-dispersion cavity.
This paper presents a novel approach to dual-frequency comb generation utilizing a single fiber Fabry–Perot resonator, advancing the implementation of these sources in fiber-based systems. Dual-comb applications such as spectroscopy, ranging, and imaging, known for their high-resolution and rapid data acquisition capabilities, benefit significantly from the stability and coherence of optical frequency comb sources. Our method leverages the birefringent property of the resonator induced by the optical fiber to generate two orthogonally polarized optical frequency combs in a monolithic resonator. This approach allows for the generation of two different frequency combs with slightly different repetition rates, exhibiting excellent mutual coherence, making it highly relevant for dual-comb applications. The 40 nm bandwidth generated combs are induced by switching-waves in a normal dispersion fiber Fabry-Perot resonator. These comb types have the advantage of being easily generated by a pulse pumping scheme, which is employed in this study. Finally, the potential of the source is demonstrated by a proof-of-concept spectroscopy measurement.
We present a thorough study of the use of As2S3 thin films for the fabrication of high-performance multi-cavity bandpass filters. We show that such layers can be used inside a non-quarterwave multi-cavity Fabry–Perot structure to produce local changes of the central wavelength of the filter using photosensitive properties of this material. In particular, we study the impact of these index changes on the spectral performances of the filters and show how to adapt the design of the Fabry–Perot structures to produce a spectral shift without degrading the bandpass profile. Double- and three-cavity Fabry–Perot filters are theoretically and experimentally studied.
The development of high power lasers implies specific needs of optics with very low absorption to avoid detrimental thermal effects up to damage of optical components, and associated metrology of these optics. In this work, we discuss on our recent developments of a thermographic-based technique to measure absorption: specifically, the Lock-In Thermography (LIT) technique applied in a multipass configuration to increase the effective power on the tested samples. We will present the system developed at the Institut Fresnel that is based on 1.5 kW Ytterbium fiber, that allows to submit samples to 5 kW effective power and measure absorption levels down to the ppm on optical coatings.