In the traditional assembly line balancing, all the workstations are assumed available and hence the unavailability of any workstation brings about the stoppage of the whole line and the waste of the production capacity in the rest workstations. Considering the planning characteristic of preventive maintenance, this paper proposes a novel methodology of integrating the preventive maintenance scenarios into assembly line balancing problems to bypass the unavailable workstation. A lexicographic model is formulated to generate multiple task assignment plans that ensure primarily the high productivity under regular operation scenario and guarantee secondarily the production continuity under preventive maintenance scenarios. And, an improved whale optimization algorithm (IWOA) with three modifications is proposed to solve this problem. Specifically, a combined crossover operator enhances better combination in exploration; three best search agents promote the exploitation; partial regeneration avoids being trapped in local optima. More than five thousand experiments demonstrate that the joint of three modifications endows the IWOA significant superiority over six variants and other six well-known algorithms. Moreover, integrating preventive maintenance scenarios into the assembly line balancing problem increases the production efficiency by 1% at the cost of small production adjustment.
Ellipsometry is an important metrology tool in a plethora of industries. The measurement accuracy can be significantly affected by the existence of Poisson-Gaussian mixed noise. This paper quantifies the induced error on normalized Mueller matrix measurements through statistical analysis. A method is then proposed to mitigate the effects of Poisson-Gaussian noise in spectroscopic ellipsometry signal demodulation, based on maximum likelihood estimation. The noise is characterized through experiments on an in-house setup. The improved performance of dimension reconstruction from the proposed method is demonstrated through simulations.
In order to efficiently extract the sample Mueller matrix by dual rotating–retarder ellipsometry, it is critical for the data reduction technique to achieve a minimal data processing burden while considering the ease of retarder control. In this paper, we propose an unevenly spaced sampling strategy to reach a globally optimal measurement matrix with minimum sampling points for continuous measurements. Taking into account the robustness to both systematic errors and detection noise, we develop multi-objective optimization models to identify the optimal unevenly spaced sampling points. A combined global search algorithm based on the multi-objective genetic algorithm is subsequently designed to solve our model. Finally, simulations and experiments are conducted to validate our approach as well as to provide near-optimal schemes for different design scenarios. The results demonstrate that significant improvement on error immunity performance can be achieved by applying an unevenly sampled measurement strategy compared to an evenly sampled one for our ellipsometer scenario.
This paper analyzes the principle of system engineering and the systematic characteristics of the standard system and points out that the standard system is characterized by systematisms and it is suitable to use the system theory to guide the construction of the standard system. The methods of standard system construction are summarized, including the construction method of enterprise standard system determined by GB/T 13016, comprehensive standardization method, model architecture method, etc. Through the research, it is found that these methods can provide theoretical basis for the construction of standard system architecture. Then, based on big data this paper analyzes the development status of China’s national standard system, intelligent manufacturing industry standard system and State Grid enterprise standard system from the three levels of country, industry and key enterprises, summarizes the evolution and structural characteristics of the complex system’s standard system, summed up interaction relationship between complex system and standard system. On this basis, the construction method of complex system standard system using system engineering method is put forward, including the definition of complex system requirements, the analysis of the status and requirements of the standard system, the design of the standard architecture, the determination of the standard list, the operation and maintenance of the standard system. Finally it takes an standard system as an example to evaluate the applicability of this method.