The green synthesis of nanoparticles using plants and their extracts is considered as a representative approach in material syntheses for environmental benignity. Numerous metal nanoparticles with potential bioactivities have been prepared based on plant extracts. In this paper, we report an eco-friendly technique for the preparation of silver nanoparticles (AgNPs) using seed extract of Alpinia katsumadai, and the evaluation of their antioxidant, antibacterial, and cytotoxicity activities. UV-visible spectroscopy, FETEM, EDX, SAED, XRD, DLS and FT-IR analysis were used to characterize the morphology and crystalline phase of AgNPs. The FETEM and DLS analysis showed AgNPs were quasi-spherical in shape, with an average diameter of 12.6 nm for the size distribution. The SAED spectrum of the AgNPs indicated their crystalline nature, which was further confirmed by the XRD studies. The FT-IR spectra revealed that phytochemicals from Alpinia katsumadai seed extract act as a capping and reducing agent for AgNP formation. The AgNPs showed distinctive free radical scavenging, potent antibacterial activity against different types of bacteria, and cytotoxicity activities. The results confirmed that Alpinia katsumadai is a potential bio-resource/biomaterial for synthesizing AgNPs with applications in antibacterial and antioxidant agents.
1 December 2017 in Environmental Toxicology and Pharmacology
A simple approach using Nelumbo nucifera seeds for synthesizing silver nanoparticles with potential antibacterial and cytotoxic activities was described.
Cu2O nano-particles were prepared by the liquid-phase reduction method and the effect of the dispersant was studied. The microstructure, surface morphology and optical properties of Cu2O nano-particles were characterized by X-ray diffractometer, X-ray photoelectron spectroscopy, nitrogen static adsorption, scanning electron microscope, particle size analysis, ultraviolet visible light spectrophotometer and photoluminescence spectrometer. The photocatalytic degradation of fluroxypyr using Cu2O was studied by the response surface methodology, and the quadratic multinomial mathematical model was established. The results indicated that the Cu2O crystal particles prepared using the dispersant of polyvinylpyrrolidone were of high purity with the preferential orientation of (111). The average particle size was 605.4 ± 124.8 nm, the specific surface area was 22.641 m2/g, the band gap was approximately 2.04 eV and the absorption edge was about 650 nm. R2 of the established quadratic model was 0.9973 and had good fitness, indicating that the established model was reliable. The optimal degradation conditions were obtained as follows: the initial concentration of fluroxypyr was 11.17 mg/L, the pH of the solution was 12.0 and the H2O2 concentration was 15 mg/L. The degradation rate of fluroxypyr could reach 83.2% and the relative error was 1.20%. After nine times of recycling, more than 75% of fluroxypyr could be degraded.
Cu2O/TiO2 thin film is obtained by electrodeposition method. The structure and optical properties of thin film are characterised using X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), SEM, Raman, PL and ultraviolet visible spectrophotometer (UV-Vis). Photocatalytic performance of Cu2O/TiO2 thin film and degradation pathways for methylene blue (MB) is also investigated in this paper. The results indicate that the pure Cu2O/TiO2 thin film with the (111) preferential orientation shows a high photocatalytic activity, whose crystal structure exhibits high quality and is characterised by novel Raman optical properties of nanometre spherical morphology. PL and UV-Vis results indicate that Cu2O/TiO2 thin film has an obvious absorption and photoelectric response at the visible light range. After 300°C annealing treatment for the film, the intensity peak of (111) crystal plane and UV-Vis absorption intensity have enhanced 60 and 50%, respectively. The reaction rate constant and photoluminescence intensity are 2.8 and 3.4 times as high as those before annealing treatment. The separated efficiency of electron-hole pairs is increased. More than 99.9% of MB can be degraded in 3 h by Cu2O/TiO2 thin film. Moreover, MB molecule can be decomposed completely. Recycling use of the catalyst has revealed that the film can be reused for 18 times.
A green method has been developed for the synthesis of N -arylsulfonylhydrazones via a simple grindstone procedure. By grinding mixtures of benzensulfonyl hydrazides and a series of aryl aldehydes or ketones in the mortar using L-tyrosine as catalyst, 24 N -arylsulfonylhydrazones were synthesized in a few minutes with high yield. All compounds were screened for their antibacterial activities. Most of them exhibit some antibacterial activities especially for 3d, 3l and 3v showing high activity against Staphylococcus aureus and Escherichia coli .