8 May 2025 in IEEE Transactions on Power Electronics
Wireless power transfer (WPT), as a noncontact power transfer technology, is expected to solve the power supply difficulties faced by ocean power equipment due to the environment's complexity. However, when the magnetically coupled WPT system operates in seawater, eddy current losses (ECL) affected by the resonant frequency are generated, which in turn causes the resonant frequency characteristics of the system to be altered compared to those in air. The resonant frequency characteristics of WPT have been thoroughly researched, and expressions for the relationship between resonant frequency and efficiency have been derived by utilizing the mutual inductance circuit model with equivalent ECL resistance. The influences of resonant frequency variation on transmission efficiency and distance are comparatively analyzed for the system in seawater and in air, respectively, with the differences between the two situations further illustrated. Research has discovered that there is an optimal resonance frequency for WPT. The factors influencing the optimal resonance frequency were analyzed, and it was concluded that the contact area between the coil and seawater was the key factor affecting it. An experimental system for WPT in seawater media was constructed, and theoretical and simulation conclusions were validated through experiments.
30 September 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Due to the rapid attenuation nature of electromagnetic fields in wireless power transfer system within a large-scale spatial, it is difficult to realize spatial scale spanning to meet the current urgent demand for power supply of multi-loads electronic devices in unmanned indoor scenarios such as internet of things and automatic warehouse. In order to solve this problem, a novel transmitting structure with active relay coil is proposed in this paper for realizing power transfer at any location and number of loads within large-scale three-dimensional space. Firstly, the transmitter can be ensured that the winding directions of adjacent planar coils on the ceiling and floor of the space are different to increasing the magnetic field density; at the same time, the longitudinal direction of the magnetic field on the same side in the spatial region can be guaranteed to be the same, to extend the magnetic flux paths and the spatial transfer scale. Through experimental studies, 12 loaded light bulbs scattered in different positions within the space of 1.8m*1.4m*2.0m were all lit with the total efficiency of 80%, not limited to that number of loads. Under the single load, the minimum transfer efficiency is 8.2% and the maximum is 50%.