24 July 2017 in Smart Materials and Structures
The use of welded steel cover plates had been a common design practice to increase beam section capacity in regions of high moment for decades. Many steel girder bridges with cover plates are still in service. Steel girder bridges are subject to cyclic loading, which can initiate crack formation at the toe of the weld and reduce beam capacity. Thus, timely detection of fatigue cracks is of utmost importance in steel girder bridge monitoring. To date, crack monitoring methods using in-house radio frequency identification (RFID)-based sensors have been developed to complement visual inspection and provide quantitative information of damage level. Offering similar properties at a reduced cost, commercial ultra-high frequency (UHF) passive RFID tags have been identified as a more financially viable option for pervasive crack monitoring using a dense array of sensors. This paper presents a study on damage sensitivity of low-cost commercial UHF RFID tags for crack detection and monitoring on metallic structures. Using backscatter power as a parameter for damage identification, a crack sensing system has been developed for single and multiple tag configurations for increased sensing pervasiveness. The effect on backscatter power of the existence and stage of crack propagation has been successfully characterized. For further automation of crack detection, a damage index based on the variation of backscatter power has also been established. The tested commercial RFID-based crack sensor contributes to the usage of this technology on steel girder bridges.
1 March 2019 in Journal of Aerospace Engineering
A passive radio frequency identification (RFID)-based crack sensor was developed and its sensitivity to crack propagation on metallic plates has been experimentally validated. A crack propagation test method was designed to evaluate any backscatter power-based crack sensor to monitor propagating cracks on a metallic surface. This new method uses plate specimens designed for standard fracture toughness testing. Systematic increases in displacement with a hydraulic universal test machine to propagate the crack were performed. Using digital imagery, the physical characteristics of the crack and fracture mode were determined with high precision. Linear elastic fracture was induced so as to more closely resemble the fracture mode that is to be expected in high strength steel bridge girders. The sensor was tested as a single unit and in various arrays of multiple units for increased pervasiveness in monitoring. A piecewise relationship between the damage index and crack opening was found. This relationship is a significant finding that demonstrates that RFID-based crack sensing is a feasible tool for bridge inspection.