The 7.8-magnitude Nepal earthquake on April 25, 2015, caused more than 9,000 fatalities and tremendous damage to civil infrastructures. Some unique characteristics of this earthquake and its effects on a prototype unreinforced masonry (URM) building have been investigated in this paper. The ground motion has short period components in the period range of T<0.5 s as well as long-period components in the period range of 4–6 s. This characteristic is unique with respect to recorded ground motions in other parts of the world and with respect to the design response spectra in the Kathmandu region. Effects of this particular composition of frequency contents are discussed within the context of both elastic and inelastic response spectra. Common ground motion parameters for this earthquake have been investigated to compare the destructiveness of this earthquake to other historical earthquakes. In addition to this, acceleration spectrum intensity (ASI), which has been typically utilized for seismic evalu...
In the New York Metropolitan area, steel box girders are commonly constructed from weathering steel, which has little available research into their performance in fire. This paper will discuss the current literature, challenges, and available verific
Infrastructure risk due to fire has been well documented. In particular, bridges in the urban environment are susceptible due to low overhead clearances on overpasses, existing simple spans with no redundancy, narrow lane widths, and general alignment congestion. Although the risk is significant, the current AASHTO Bridge Design Specification does not include provisions for design due to fire conditions. As such, this paper considers alternatives for improving the fire resistance of steel bridges using both traditional and non-traditional fire protection methods. In this paper, a total of eight parameters are investigated: (1) global section factor (W/D ratio) of bridge girder cross-section; (2) thickness of the flange; (3) thickness of the web; (4) steel material specification; (5) concrete slab width; (6) concrete slab thickness; (7) thickness of intumescent paint; and (8) thickness of SFRM. It is shown that the temperature domain performance can be significantly increased by (1), (3), (7), and (8) while the other parameters are less effective. The recommendations from this research can be readily implemented in both bridge design and retrofit scenarios.