16 July 2020 in IEEE Access
This paper presents a LiDAR-equipped unmanned aerial vehicle (UAV) performing semi-autonomous wind-turbine blade inspection which includes traversing to the blade tip and back, while keeping constant relative distance and heading to the blade plane. Plane detection is performed applying the RANSAC method on a subset of the gathered pointcloud. Utilizing the relative distance to the inferred plane as well as its normal vector, the UAV is able to maintain a constant distance and heading towards the plane while moving in parallel with it. The proposed procedure performs successful wind-turbine blade inspections with minimal operator involvement. Inspection results include high-resolution blade images as well as a 3D model of the wind-turbine structure. Finally, to show the feasibility of this approach, simulations are performed on a wind-turbine model and experimental results are presented for an outdoor single-blade inspection scenario both on a mock-up setup and a full-scale wind-turbine blade. It is worth noting that the system’s adequacy has been fully validated in real conditions on an operational wind farm.
7 August 2023 in IEEE Access
In this paper we address the problem of trajectory following in an unknown environment with an unmanned aerial vehicle (UAV). The main goal is to safely follow the planned trajectory by avoiding obstacles. The proposed approach is suitable for aerial vehicles equipped with 2D or 3D sensors, such as LiDARs. We present a novel algorithm based on the conventional Artificial Potential Field (APF) called Augmented Artificial Potential Field (AAPF) that corrects the planned path to avoid obstacles. Our proposed algorithm uses a combination of two attractive forces and both normal and rotational repulsive forces to avoid obstacles and handle local minima problems. The smooth trajectory following achieved with the MPC tracker allows us to quickly change and re-plan the UAV path. Comparative simulation experiments have shown that our approach solves local minima problems in trajectory following and generates more efficient paths to avoid potential collisions with static obstacles compared to our previously developed algorithm for obstacle avoidance. The laboratory experimental evaluation results indicate that the algorithm can be deployed on a real UAV with limited computational power and real-time processing requirements.
10 July 2023 in Journal of Intelligent & Robotic Systems
This paper presents an Unmanned Aerial Vehicle (UAV) platform used for the competition held at the International Conference for Unmanned Aircraft Systems 2022 (ICUAS’22). The envisioned scenario in the competition is delivering an extinguishing ball to a fire with a UAV. Driven on that thought, the qualifying round of the competition is organized in a realistic simulation environment. The competitors are required to navigate through a cluttered environment into a free space, where they perform a search for the target and deliver the ball as close as possible to that target. The competition finals were organized as a part of the conference, with the same goal as in the simulation qualifiers. The UAVs used for the competition are prepared and provided by the organizers. A detailed description of the UAV software and hardware is outlined in the paper as a step towards standardizing aerial research platform.
31 December 2024 in IEEE Transactions on Automation Science and Engineering
This paper proposes a unified dynamic model for aerial robots which encompasses all known actuation principles including tilting propellers and centroid variation methods such as moving masses or robotic manipulators. Of course, one can envision a wide variety of vehicles, all with different combinations of actuation principles. Therefore, a generalized modeling methodology for such vehicles is developed and presented in this paper. The modeling approach is verified through a comparative analysis of MATLAB simulations and laboratory experiments with a tilting propeller aerial manipulator vehicle, named Toucan . Finally, in order to fully explore and exploit the capabilities of the designed aerial manipulator, contact-based experiments with force tracking are performed using the proposed adaptive impedance controller. To demonstrate the advantages of such a vehicle, the adaptive impedance control method is used to generate position and orientation commands and achieve end-effector force tracking on a flat surface while the aerial manipulator maintains a neutral attitude. This greatly increases the stability and safety of contact-based operations, as the vehicle does not require changes in attitude to meet the force requirements. Note to Practitioners —This paper was motivated by a surge of different configurations of aerial vehicles emerging. A modeling method for generalized aerial vehicles is presented to determine which vehicle configurations are best suited for a specific application. This approach considers vehicles with additional actuators such as tilting propellers and robotic manipulators. The effectiveness of the proposed method is validated on a custom-designed quadrotor with four moving masses emulating centroid variation of a generic robotic manipulator. This original design is augmented with tilting propellers, yielding a truly generalized experimental platform. The generalized modeling algorithm and the experimental platform are tested both in free flight and in a scenario that demonstrates applying the desired force to a flat surface. Overall, we showcase the proposed generalized modeling is a useful tool for the rapid prototyping and design of aerial manipulators, paving the way for more advanced and capable systems in the future. With this approach, practitioners can gain a better understanding of the potential and limitations of their aerial vehicles, and ultimately improve their performance and effectiveness in specific applications.
24 December 2025 in IEEE Robotics & Automation Magazine
Autonomous robotic systems play an increasingly important role in overcoming complex maritime challenges, where the environment requires high adaptability, robustness, and precision. Marsupial robotic systems, combining aerial systems and surface vessels, offer a powerful solution for coordinated missions in Global Navigation Satellite System (GNSS)-denied scenarios, leveraging the unique capabilities of each robot to form a versatile team. This article presents a system integrating advanced sensor fusion, localization, mission planning, and communication to enable seamless collaboration between unmanned aerial vehicles (UAVs) and autonomous surface vehicles (ASVs). The focus is on optimizing the vehicles’ interaction to efficiently locate, retrieve, and transport objects from a target vessel in an adverse sea environment. This article provides a complete system overview, including the hardware setup, algorithms used, implementation details, and field trial results. The results analysis demonstrates the advanced capabilities of the developed ASV‒UAV system in complex real-world maritime operations, underscoring its potential for coordinated multirobot tasks in environments where traditional navigation systems are unavailable. Notably, this system was developed by the team that secured first place in the Mohamed Bin Zayed International Robotic Challenge (MBZIRC), proving its excellence in challenging conditions.