19 November 2010 in Journal of Geodesy
AUSGeoid09 is the new Australia-wide gravimetric quasigeoid model that has been a posteriori fitted to the Australian Height Datum (AHD) so as to provide a product that is practically useful for the more direct determination of AHD heights from Global Navigation Satellite Systems (GNSS). This approach is necessary because the AHD is predominantly a third-order vertical datum that contains a ~1 m north-south tilt and ~0.5 m regional distortions with respect to the quasigeoid, meaning that GNSS-gravimetric-quasigeoid and AHD heights are inconsistent. Because the AHD remains the official vertical datum in Australia, it is necessary to provide GNSS users with effective means of recovering AHD heights. The gravimetric component of the quasigeoid model was computed using a hybrid of the remove-compute-restore technique with a degree-40 deterministically modified kernel over a one-degree spherical cap, which is superior to the remove-compute-restore technique alone in Australia (with or without a cap). This is because the modified kernel and cap combine to filter long-wavelength errors from the terrestrial gravity anomalies. The zero-tide EGM2008 global gravitational model to degree 2,190 was used as the reference field. Other input data are ~1.4 million land gravity anomalies from Geoscience Australia, 1′ × 1′ DNSC2008GRA altimeter-derived gravity anomalies offshore, the 9′′ × 9′′ GEODATA-DEM9S Australian digital elevation model, and a readjustment of Australian National Levelling Network (ANLN) constrained to the CARS2006 mean dynamic ocean topography model. To determine the numerical integration parameters for the modified kernel, the gravimetric component of AUSGeoid09 was compared with 911 GNSS-observed ellipsoidal heights at benchmarks. The standard deviation of fit to the GNSS-AHD heights is ±222 mm, which dropped to ±134 mm for the readjusted GNSS-ANLN heights showing that careful consideration now needs to be given to the quality of the levelling data used to assess gravimetric quasigeoid models. The publicly released version of AUSGeoid09 also includes a geometric component that models the difference between the gravimetric quasigeoid and the zero surface of the AHD at 6,794 benchmarks. This a posteriori fitting used least-squares collocation (LSC) in cross-validation mode to determine a correlation length of 75 km for the analytical covariance function, whereas the noise was taken from the estimated standard deviation of the GNSS ellipsoidal heights. After this LSC surface fitting, the standard deviation of fit reduced to ±30 mm, one-third of which is attributable to the uncertainty in the GNSS ellipsoidal heights.
7 August 2017 in Journal of Geodesy
We describe the computation of the first Australian quasigeoid model to include error estimates as a function of location that have been propagated from uncertainties in the EGM2008 global model, land and altimeter-derived gravity anomalies and terrain corrections. The model has been extended to include Australia’s offshore territories and maritime boundaries using newer datasets comprising an additional \({\sim }\)280,000 land gravity observations, a newer altimeter-derived marine gravity anomaly grid, and terrain corrections at \(1^{\prime \prime }\times 1^{\prime \prime }\) resolution. The error propagation uses a remove–restore approach, where the EGM2008 quasigeoid and gravity anomaly error grids are augmented by errors propagated through a modified Stokes integral from the errors in the altimeter gravity anomalies, land gravity observations and terrain corrections. The gravimetric quasigeoid errors (one sigma) are 50–60 mm across most of the Australian landmass, increasing to \({\sim }100\) mm in regions of steep horizontal gravity gradients or the mountains, and are commensurate with external estimates.
27 September 2018 in Journal of Geodesy
AUSGeoid2020 is a combined gravimetric–geometric model (sometimes called a “hybrid quasigeoid model”) that provides the separation between the Geocentric Datum of Australia 2020 (GDA2020) ellipsoid and Australia’s national vertical datum, the Australian Height Datum (AHD). This model is also provided with a location-specific uncertainty propagated from a combination of the levelling, GPS ellipsoidal height and gravimetric quasigeoid data errors via least squares prediction. We present a method for computing the relative uncertainty (i.e. uncertainty of the height between any two points) between AUSGeoid2020-derived AHD heights based on the principle of correlated errors cancelling when used over baselines. Results demonstrate AUSGeoid2020 is more accurate than traditional third-order levelling in Australia at distances beyond 3 km, which is 12 mm of allowable misclosure per square root km of levelling. As part of the above work, we identified an error in the gravimetric quasigeoid in Port Phillip Bay (near Melbourne in SE Australia) coming from altimeter-derived gravity anomalies. This error was patched using alternative altimetry data.
18 May 2011 in Journal of Spatial Science
In an absolute sense, AUSGeoid09 is an order of magnitude more accurate than AUSGeoid98 at converting ellipsoidal heights to Australian Height Datum (AHD) heights and vice versa. Results of this study show AUSGeoid09 can be used to compute AHD heights from Global Navigation Satellite System (GNSS) ellipsoidal heights with an uncertainty of less than ±0.03 m (one sigma). The improvement is largely due to the inclusion of a geometric component in AUSGeoid09 that accounts for the spatially varying offset between a gravimetric quasigeoid model and the AHD. This geometric component was calculated using least squares collocation in cross validation mode and then added to the gravimetric quasigeoid. Although previous AUSGeoid models were used to convert GNSS ellipsoidal heights to the AHD and vice versa, none until now have accounted for the gravimetric quasigeoid to AHD offsets. This offset is a consequence of how the AHD was realised and has commonly resulted in misfits of ∼0.5 m or more. When used with GNSS technology, AUSGeoid09 can replace the need for traditional third-order levelling (Class LC; 12 ) in many situations. Relative tests of AUSGeoid09 over a continent-wide set of over 20 million baselines showed that it can deliver better than Class LC tolerances in 99 percent of cases. The model accepts a user's GDA94 latitude, longitude and ellipsoidal height and returns an AHD height and deviations of the vertical. AUSGeoid09 is now available free-of-charge on the Geoscience Australia website ( http://www.ga.gov.au/geodesy/ausgeoid/nvalcomp.jsp).
26 March 2010 in Australian Journal of Earth Sciences
This paper investigates and quantifies the near-field and far-field contamination effects from Groupe de Recherche en Géodesie Spatiale GRACE products to assess whether or not they influence the accuracy with which hydrological signals in the Murray-Darling Basin, southeast Australia can be estimated. Far-field contamination was assessed by simulating some of the world's largest geophysical processes which generate major gravitational signals (e.g. melting of the Greenland icesheet, hydrology in the Amazon Basin) and measuring the proportion of the simulated signal detected in the Murray-Darling Basin. Near-field contamination from the Australian continent (excluding the Murray-Darling Basin) was also assessed. The sum of the near-field and far-field effects revealed a maximum of ∼10 mm (equivalent water height) of spurious signal within the Murray-Darling Basin. This equates to only one quarter of the formal uncertainty of the basin-scale estimates of changes in total water storage. Thus, GRACE products can be used to monitor broad-scale hydrological trends and variability in the Murray-Darling Basin without the need to account for contamination from external geophysical sources.
31 August 2011 in Natural Hazards