1 July 2019 in Smart Materials and Structures
Lunar dust removal is one of the most important issues to be solved in lunar exploration. A lunar dust removal method based on the anomalous photovoltaic effect of lanthanum-modified lead zirconate titanate has been developed in our previous research which could be used for conductor surface dedusting. In this study, a novel lunar dust removal technique utilizing a couple of coplanar bipolar dust-removing electrodes is proposed. With this technique, lunar dust on different kinds of surface (conductor and nonconductor) can be reliably debrided. The working principle of this technique is introduced first, followed by a series of simulations and experiments which demonstrate that this technique can generate an adequate absorbing force on the lunar dust lying on the insulating or conducting surface and can provide ideal dedusting performance. Effects of electrode area and dust particle size on the dust removal efficiency are investigated. A crawler-type autonomous dust-removing device is developed in which a couple of flexible coplanar bipolar electrodes are designed as the crawler belts of the device. By controlling the path and velocity of the dust-removing device, a 95.3% dust removal rate was achieved in a dedusting test on a 500 × 400 mm 2 plank. This study provides a new feasible method for future lunar dust removal mission.
11 September 2024 in Smart Materials and Structures
The inspection, maintenance, and repair of complex pipelines have motivated the development of soft robots with highly flexible and good adaptability. In this study, inspired by the unique locomotion of earthworms, we developed a type of smart material–driven soft modular pipe robot capable of stable manipulation and performing in unstructured pipe environments, which easily assembles into more complex configurations with multiple modules for practical use. Our prototype robot consists of three soft telescopic modules connected in series with flexible bellows and a tail friction mechanism, where the modules adopt a high-energy density shape memory alloy spring as an actuator. Based on analyzing the peristaltic process of the module inside the pipe, it is ensured that the geometric constraint performance of the braided mesh pipe is reasonably matched with the thermomechanical performance of the SMA spring to realize the alternating conversion of anchoring and releasing. By optimizing the overall robotic structure, it is demonstrated that our robot achieves robust crawling in horizontal, vertical, variable-diameter, and curved pipes, wet pipes with the partial presence of water, and pipes with complex cavities through simple open-loop on/off control.
14 November 2017 in Smart Materials and Structures
The deposition of lunar dust on the surface of a lunar probe has an adverse effect on the performance of the equipment. This paper proposes novel lunar dust removal technology, which is triggered by UV light isolated from sunlight, to clean the adhered dust using the high voltage produced by the anomalous photovoltaic effect of lanthanum modified lead zirconate titanate. Based on the equivalent electrical model, the mathematical model of electrostatic field force used for removing lunar dust particles is established. Based on the mathematical model the influencing factors of dust removal efficiency are proposed and analyzed by experiments. To improve the dust removal efficiency, a conductive dust removal electrode is designed, coated with a layer of insulating film to avoid the reciprocating motion of dust particles, and the feasibility of the configuration is proved by experiments.
1 April 2026 in Smart Materials and Structures
Soft robotic end-effectors, offering superior adaptability, safety, and flexibility, enable robots to perform complex and delicate tasks. However, passive adhesion often results in insufficient contact with target surfaces, limiting grasping stability and locomotion. To address this issue, we present a shape memory alloy (SMA)-driven electrostatic adhesive soft end-effector (SEAE) that integrates deformation actuation with electrostatic adhesion control. The SEAE comprises an SMA-actuated module and an electrostatic adhesive module. By selectively heating two embedded SMA wire layers within the actuation module, the electrostatic adhesive unit at the end of the SEAE is cyclically driven to achieve dynamic adhesion and detachment from target surfaces. Based on this design, a wall-climbing robot, an inchworm-like crawling robot, and a soft gripper are developed using SEAEs as their feet or fingers. Experimental results validate the feasibility of the proposed SEAE concept for climbing, crawling, and grasping tasks across representative surface materials and geometries. The SEAE concept proposed here demonstrates the feasibility of integrating electrostatic adhesion into soft robotic systems and suggests its potential applicability in a broader range of soft robotic scenarios.