27 July 2022 in IEEE Access
With the development of new Internet of Things (IoT) applications, such as unmanned ground vehicle (UGV), unmanned aerial vehicle (UAV), and unmanned surface vessel (USV), the security of wireless device identification is getting more and more attention. The radio frequency fingerprint (RFF) technology utilizes the unique hardware characteristics of the device for identity authentication, which overcomes the security risks of traditional authentication schemes based on distributable keys. In this paper, we propose an RFF identification scheme based on logarithmic power cosine spectrum for transient signals. We use the sliding window variance trajectory-based posterior probability density detection algorithm to improve the efficiency of transient signal detection, then adopt the discrete Fourier transform to extract the logarithmic envelope power spectrum of the transient signal, after that utilize the cosine transform to compresses the frequency domain features, and finally construct the 7-dimensional RFF feature vector. For the application scenario of USV, we acquire the radio frequency signals of 7 marine automatic identification systems (AIS) as the test dataset. The experimental results show that the proposed scheme can achieve ideal recognition accuracy using a Support Vector Machine as the classifier. Meanwhile, we use Principal Component Analysis to verify that the 7-dimensional RFF feature vector has good distinguishability for different wireless devices.
18 February 2025 in IEEE Transactions on Vehicular Technology
Radio frequency fingerprint (RFF) technology has emerged as a prominent research direction within the field of wireless security because it uses the distinctive hardware characteristics of individual devices for identity authentication. In the context of the Gaussian Filtered Minimum Shift Keying (GMSK) modulation mode, this research introduces an RFF identification framework centered on the analysis of eye diagram, and proposes an RFF feature extraction method based on eye diagram traces deviation (EDTD). In practical applications, considering that the presence of synchronization errors leads to the divergence of the eye diagram traces (EDT) obtained through baseband demodulation, a frame folding synchronization algorithm is proposed, which enhances the generation of the EDT. The eye diagram traces density plot generated from EDT is further utilized to obtain the probability density curve with peak clustering characteristics. Furthermore, recognizing the significance of the time-bandwidth product ($BT$) in shaping the GMSK baseband signal eye diagram, a $BT$ parameter estimation algorithm based on probability density curves is proposed, and then an inversion calculation is applied to attain the ideal EDT. By scrutinizing the statistical attributes of the EDTD, which represents the disparity between the measured signal's EDT and the theoretically ideal EDT derived through inversion, a 27-dimensional RFF feature vector is constructed. This feature vector is combined with a lightweight classifier to accomplish the task of wireless device identification. To verify the effectiveness of our proposed method, two types of devices utilizing GMSK modulation methods were used to construct separate datasets, which are marine automatic identification system (AIS) devices and internet of things (IoT) modules utilizing the global system for mobile (GSM) communications technology. And it was tested and compared with intelligent feature extraction methods based on deep learning. The results show that with only 150 training samples per device, our solution can achieve $99\%$ identification accuracy for AIS devices composed of independent radio frequency circuits, and over $80\%$ for GSM IoT devices composed of integrated circuits.
1 January 2022 in International Journal of Vehicle Performance