We report a novel and facile organosilane plasma polymerization method designed to improve the surface characteristics of poly(tetrafluoroethylene) (PTFE). We hypothesized that the polymerized silane coating would provide an adhesive surface for endothelial cell proliferation due to a large number of surface hydroxyl groups, while the large polymer networks on the surface of PTFE would hinder platelet attachment. The plasma polymerized PTFE surfaces were then systematically characterized via different analytical techniques such as FTIR, XPS, XRD, Contact angle, and SEM. The key finding of the characterization is the time-dependent deposition of an organosilane layer on the surface of PTFE. This layer was found to provide favorable surface properties to PTFE such as a very high surface oxygen content, high hydrophilicity and improved surface mechanics. Additionally, in vitro cellular studies were conducted to determine the bio-interface properties of the plasma-treated and untreated PTFE. The important results of these experiments were rapid endothelial cell growth and decreased platelet attachment on the plasma-treated PTFE compared to untreated PTFE. Thus, this new surface modification technique could potentially address the current challenges associated with PTFE for blood contact applications, specifically poor endothelial cell growth and risk of thrombosis.
1 November 2019 in Colloids and Surfaces B: Biointerfaces
Atmospheric pressure plasma jet (APPJ) based modification as a facile method to modify the intimal surface of small caliber nanofibrous tubular tissue scaffolds for potential use as vascular-graft or spinal-cord conduit is reported here. Polycaprolactone, a biomaterial used in the US Food and Drug Administration approved scaffolds for various tissue regeneration and bioabsorbable suture applications, was electrospun into thin nano/microfibers to form seamless three-dimensional (3D) conduits of 4 mm intimal diameter. The 3D conduits were subjected to treatment with an APPJ produced by dielectric barrier discharge using controlled gas flow into ambient atmosphere. He/air or He/air/NH3 gas mixtures combined with 8.5 kV pulsed direct current signal proved effective in creating a sustained and reactive cold plasma jet to modify the intimal surface of tubular scaffolds without affecting its biomechanical properties. The treatment resulted in surface chemistry modification as indicated by enrichment of oxygenated functional groups. Surface chemistry was determined via x-ray photoelectron spectroscopy. Scanning electron microscopy and glycerol contact angle measurements were used to determine the surface morphology and surface wettability. The data support the conclusion that APPJ is as an effective, facile, and robust approach to modify the intimal surface of small-caliber (<4 mm) tubular conduits (successfully accomplished and initially reported here) for potential applications in vascular and neural tissue engineering.
1 March 2021 in Current Opinion in Biomedical Engineering