19 July 2021 in Journal of Physics D: Applied Physics
The underwater electrical wire explosion (UEWE) is an appealing source of underwater shock waves (SWs) with a high conversion efficiency from electrical energy to mechanical energy, good repeatability and controllability. Industrial applications are already seen in oil-well unblocking and stratum stimulation, and research is currently underway to apply UEWEs in electro-hydraulic forming, exploitation of unconventional gas and oil resources, etc. The emerging new applications call for a review on UEWE research from the perspective of an efficient SW source. This review paper considers the physical processes and numerical simulation methods, electrical and SW characteristics, and current and potential applications, and provides suggestions for future research directions. The code (XJ_UEWE01) developed by the authors to solve a coupling model of UEWE is included. The paper will provide students and researchers new to this field with an explanation of basic concepts of UEWE and a detailed overview of previous studies, and will aid research on UEWE applications, especially device development and parameter optimization.
28 October 2021 in Journal of Physics D: Applied Physics
The combination of energetic material (EM) and an electrical wire explosion (EWE) is an important way to achieve effective release and conversion of electrical and chemical energy, e.g. by generating strong underwater shock waves (SWs) that can be used for dynamic reservoir fracturing in unconventional gas exploitation. This letter proposes a mud-like EM composed of nitromethane, aluminium and copper oxide powder, which can be detonated directly by a tungsten wire explosion. The detonation and successive deflagration result in notably enhanced SWs: with 2.8 g EM, the SW amplitude, impulse and energy are respectively increased by 1.7, 2.1, and 7.9 times compared to an optimal underwater EWE. A direct thermal initiation mechanism for the detonation process is proposed, with the exploding wire, the Joule heating along the current path in the EM and the Al/CuO thermite reaction all serving as heat sources. It is found that the Joule heating and chemical reactions reinforce each other, which is likely the key to the ‘easy’ detonation of nitromethane.
1 August 2019 in Plasma Sources Science and Technology
Electrical explosion of wires (EEW) was carried out in an argon atmosphere for the preparation of nanoparticles. Aluminium wires with 0.1 mm diameter and 13 cm length (low mass) and 0.4 mm diameter and 11 cm length (high mass) were used, for which the vaporization energy of the wire was, respectively, far below and comparable to the initial stored energy of the power-supply capacitors. A numerical model was used to study the nanoparticle formation within the exploding wire plasmas. The model is based on a moment method and was modified according to the specific requirements of EEW—rapid expansion of the exploding wire and a high concentration of monomers—to take into consideration the quenching due to mechanical work on the surrounding medium, the energy release during the vapour–liquid phase transition, and the coagulation of liquid particles. The calculation took initial and boundary values from the experimental results and predicted average particle diameters of 36 nm and 116 nm for the low mass and high mass wire respectively, which are in qualitative agreement with the experimental values of 33 nm and 103 nm obtained from SEM images. The nucleation mechanisms including homogeneous nucleation and ion-induced nucleation are discussed in detail; the importance of including the phase transition and coagulation is demonstrated.
26 September 2016 in Applied Physics Letters
A flashover switch inserted between the cathode and wire end was used to enhance the deposition energy into an exploding wire in vacuum. It was found that this flashover switch can play two roles. The first one is to reduce the rise time of the current pulse, the second and more important one to greatly improve the surface radial electric field and suppress the electronic emission that is responsible for triggering the surface breakdown of the exploding wire. Only when the flashover switch is on the cathode, the second one can take effect and result in a much higher deposition energy. In this case, the deposition energy could increase by ∼three times (3.4 eV/atom–12 eV/atom) under the negative current pulse and by ∼two times (5.7 eV/atom–13 eV/atom) under the positive one, and fully vaporized wire core was observed with laser interferometry.
27 May 2022 in IEEE Transactions on Plasma Science
The combination of energetic material (EM) and electrical wire explosion (EWE) is an efficient and economical method to generate strong shock waves (SWs). The idea resembles the exploding bridge-wire (EBW) detonator, but in this case, the EWE operates with much higher electrical energy storage, and the EMs of much lower sensitivity can be directly ignited, which provides a practical compromise among limited energy storage, strong SWs, and safe usage of explosives. The hybrid load based on EWE ignited EMs has been successfully applied for reservoir stimulation in exploitation of both conventional and unconventional oil/gas resources. In this brief review, we summarize the EWE characteristics, SW characteristics, ignition mechanism, and engineering applications of this hybrid load, and give suggestions for future research directions.
19 August 2019 in Applied Physics Letters
Underwater electrical explosions of Cu wires were carried out on a microsecond time scale to produce underwater shock waves. Experimental results show that the radial density distribution of the water flow after restrike contains several oscillations, observed as ∼1 mm-spaced layers in the backlit streak images and laser shadowgraphs. The phenomenon is attributed to the partial reheating of the exploding product (EP) by an interior restrike arc, which stimulates a compression wave propagating back and forth radially in the EP. Simulations are used to support the interior breakdown scenario and to demonstrate that each reflection of the compression wave at the EP–water interface launches a weak shock into the water, forming a multilayer structure. As the surrounding metallic vapor is ionized due to radiation and thermal conduction from the arc, the highly conductive plasma channel continues to extend radially and launches the main compression wave, which drowns out the multilayers when the power injection is sufficiently high.