8 August 2022 in IEEE Transactions on Control Systems Technology
We present a model predictive control (MPC) algorithm for energy management in aircraft with hybrid electric propulsion systems consisting of gas turbine and electric motor components. Series and parallel configurations are considered. By combining a point-mass aircraft dynamical model with models of electrical losses and losses in the gas turbine, the fuel consumed over a given future flight path is minimized subject to constraints on the battery, electric motor, and gas turbine. The optimization is formulated as a convex problem under mild assumptions and its solution is used to define a predictive energy management control law that takes into account the variation in aircraft mass during flight. We investigate the performance of algorithms for solving this problem. An alternating direction method of multipliers (ADMM) algorithm is proposed and compared with a general purpose convex interior point solver. We also show that the ADMM implementation reduces the required computation time by orders of magnitude in comparison with a general purpose nonlinear programming solver, making it suitable for real-time supervisory energy management control.
24 December 2018 in Journal of Fluids Engineering
The dynamics of an actively controlled fluidic diverter with novel actuation method are presented. This bistable fluidic valve is based on the Coanda effect and is able to switch the main flow solely by means of acoustic excitation. The switching is explained through a combination of experiments and large eddy simulations (LES). The switching time and minimum energy required are characterized for a range of pressure ratios, acoustic excitation frequencies, and input powers. It is shown that the switching mechanism depends on the excitation of natural instabilities inside the free shear layer. An enhanced roll-up of vortices at the excitation frequency increases the rate of entrainment and results in a transverse pressure gradient sufficient to counteract the Coanda effect leading to jet detachment and switching.
1 January 2025 in Journal of Aircraft
This paper studies transition trajectory optimization for a tiltwing electrical vertical takeoff and landing (eVTOL) aircraft configuration and evaluates the benefits of equipping it with fluid injection active flow control (AFC). Using a three-degree-of-freedom model of the aircraft’s longitudinal dynamics, both hover-to-cruise (forward) and cruise-to-hover (backward) transition are investigated for a range of center-of-gravity (CG) positions to determine minimum-energy trajectories that achieve zero altitude variation while avoiding wing aerodynamic stall. It is demonstrated that constant-altitude transition can be achieved in the forward direction (with or without AFC), whereas the use of AFC in backward transition reduces the total altitude change by 24%. A comparative constant-altitude backward transition solution using a different airfoil with a higher stall limit suggests that a redesign of the tail wing of this unique tiltwing aircraft could better leverage the benefits of using AFC in this application. Additionally, it is also shown that, in the case of forward transition, AFC can be used to decrease the total transition time and increase the range of CG positions where constant-altitude transition can occur.
9 September 2022 in International Journal of Hydrogen Energy
17 August 2023 in International Journal of Hydrogen Energy
1 July 2007 in American Control Conference (ACC)
In this paper we present a methodology for quantifying the accuracy of hardware-in-the-loop (HWIL) simulators. HWIL simulation refers to the process of interfacing a subset of system hardware to a controller containing a numerical model of the rest of the system. Quantification of prediction accuracy is fundamentally important in all simulations, and presents unique challenges in the HWIL context. Hardware included in HWIL is often uncertain, non-linear, time varying, or generally unpredictable. Therefore, it is impractical to expect rich sources of information about this hardware's behaviour (e.g. probability distributions) as a basis for accuracy quantification. The methodology in this paper is able to produce a priori hard guaranteed bounds on simulation error based on a minimal set of assumptions regarding the behaviour of the hardware under test. The method is applicable to simulators with uncertain, non-linear, time varying hardware, provided the software subsystem, sensors and actuators are linear. A convergence proof is given. The method has been successfully demonstrated on a real experimental HWIL simulator.