This paper presents a viscoelastic model of asphalt mixtures with the discrete element method, where the viscoelastic behaviors of asphalt mastics (fine aggregates, fines, and asphalt binder) are represented by a Burger’s model. Aggregates are simulated with irregular shape particles consisting of balls bonded together by elastic contact models, and the interplaces between aggregates are filled with balls bonded with viscoelastic Burger’s model to represent asphalt mastic. Digital samples were prepared with the image analysis technique. The micromechanical model was developed with four constitutive laws to represent the interactions at contacts of discrete elements (balls) within an aggregate, within mastic, between an aggregate and mastic, and between two adjacent aggregates. Each of these constitutive laws consists of three parts: a stiffness model, a slip model, and a bonding model in order to provide a relationship between the contact force and relative displacement and also in order to describe slipp...
1 November 2009 in Journal of Computing in Civil Engineering
The objective of this study is to visualize and simulate microscale properties of asphalt concrete with three-dimensional discrete element models under mechanical loading. The microstructure of the asphalt concrete sample was composed of three ingredients: coarse aggregates, sand mastic (a combination of fines, fine aggregates, and asphalt binder), and air voids. Coarse aggregates were represented with the irregular polyhedron particles which were randomly created with an algorithm developed for this study. The gaps among the irregular particles were filled with air voids and discrete elements of sand mastic. The mechanical behaviors of the three ingredients were simulated with specific constitutive models at different contacts of discrete elements. Based on the geometric and mechanical models, visualization and simulation of asphalt mixtures were conducted in this study.
1 January 2011 in Journal of Materials in Civil Engineering
Microstructural-based discrete element (DE) models have been used for a better understanding of asphalt pavement concrete since the late 1990s. Most current studies have been done with two-dimensional (2D) models. Moreover, elastic models are primarily employed for simulation of an asphalt matrix’s time-dependent behaviors. A 2D model is too simple to capture the complex microstructure of asphalt concrete, and an elastic model is not sufficient for simulating an asphalt matrix’s viscoelastic behaviors. Therefore, it is necessary to consider a three-dimensional (3D) viscoelastic model for microstructural-based DE simulation of asphalt mixture behaviors. Currently, it is easy to build such a 3D microstructural-based DE viscoelastic model using the existing techniques presented in the previous studies. A major challenge, however, is to reduce the computation time to run the 3D microstructural-based DE viscoelastic modeling process which is extremely time-consuming. The primary objective of this paper is to s...
Hot-mix asphalt (HMA) contains a significant amount of mineral aggregate, approximately 95% by weight and 85% by volume. The aggregate sphericity, orientation, and angularity are very important in determining HMA mechanical behaviors. The objective of this study is to investigate the isolated effects of the aggregate sphericity index, fractured faces, and orientation angles on the creep stiffness of HMA mixtures. The discrete-element method was employed to simulate creep compliance tests on idealized HMA mixtures. Two user-defined models were used to build 102 idealized asphalt-mix digital specimens. They were the R-model and the A-model, short for a user-defined rounded aggregate model and a user-defined angular aggregate model, respectively. Of the 102 digital specimens, 84 were prepared with the R-model to investigate the effects of aggregate sphericity and orientation, whereas the remaining 18 were built with the A-model to address the effect of aggregate angularity. A viscoelastic model was used to c...
1 January 2018 in Journal of Materials in Civil Engineering
In quantifying the morphological features of aggregate, X-ray computed tomography (CT) is one of the most popularly used approaches for capturing aggregate images that is considered accurate and reliable. In this study, however, a three-dimensional (3D) optical scanner was also employed to characterize aggregate morphology in addition to X-ray CT. The major objective is to validate the accuracy of the optical scanner–based image analysis method through a comparative study of the optical scanning and X-ray CT results. Four types of aggregate particles were selected, and their aggregate images were obtained through those two methods. Second, the scanned aggregate images were saved in STereoLithography (STL) files and analyzed. Then the differences in the morphological features of aggregate obtained from these two methods were quantified and evaluated. Through this study, it was found that even though there were relatively large differences in special aggregate particles (flat or elongated aggregates), the 3D optical scanner was comparable with the X-ray CT in the overall quality of the morphological characteristics of aggregate. Furthermore, differences between the two scanning technologies are dependent on particle shape and surface features. Aggregate particles with sharp angles or rich surface features may induce larger differences.
This paper presents a methodology to reduce the computation time for discrete-element (DE) modeling of asphalt-based materials, based on the frequency-temperature superposition principle. Laboratory tests on the dynamic modulus of asphalt sand mastics and asphalt mixtures were conducted at temperatures of -5, 4, 13, and 21°C and frequencies of 1, 5, 10, and 25 Hz, respectively. The test results of the asphalt sand mastics were fitted with the Burger’s model to obtain the microparameters for DE models. To reduce the computation time of the DE modeling, the regular loading frequencies were amplified to virtual frequencies. Simultaneously, the Burger’s model parameters (microparameters in DE models) of asphalt sand mastic at regular frequencies were modified to those at virtual frequencies on the basis of the frequency-temperature superposition principle. Because the virtual frequencies were much larger than the regular frequencies, the computation time was significantly reduced by conducting the DE modeling...