Robert L. Parsons

Robert L. Parsons

Auto-generated profile, based on publicly available information

Robert L. Parsons

Department of Civil, Environmental, and Architectural Environmental Engineering, University of Kansas, Lawrence, KS

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2011 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
JHJie Han
Jie Han
SPSanat K. Pokharel
Sanat K. Pokharel
XYXiaoming Yang
Xiaoming Yang
CMChandra Manandhar
Chandra Manandhar
DLDov Leshchinsky
Dov Leshchinsky
RPRobert L. Parsons
Robert L. Parsons
Recycled asphalt pavement (RAP) has been increasingly used as an energy efficient and environmentally friendly paving material and is currently the most reused and recycled material in the United States. RAP has been used in new hot mix asphalt (HMA) mixtures and in base courses for pavement construction. When RAP is used as a base course material, the presence of asphalt in RAP may cause excessive deformation under traffic loading. Geocell, three-dimensional (3D) polymeric geosynthetic cells, was proposed in this study to minimize the deformation by confining the RAP material. Full-scale accelerated pavement tests were conducted to evaluate the effect of geocell reinforcement on RAP base courses over weak subgrade. Two types of RAP were used and a total of seven geocell-reinforced and unreinforced RAP sections were tested under full-scale traffic loads. The road sections were excavated and examined after each moving wheel test. The benefits of geocell reinforcement were evaluated in rut depths for a spec...

1 August 2013 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
YQYu Qian
Yu Qian
JHJie Han
Jie Han
SPSanat K. Pokharel
Sanat K. Pokharel
RPRobert L. Parsons
Robert L. Parsons
Geogrid (uniaxial or biaxial) is one type of geosynthetics that has been successfully used in slopes, walls, roads, and other applications. The main application of biaxial geogrid is to stabilize soft subgrade and reinforce weak base courses by providing lateral confinement. The confinement due to the interaction between aggregates and the ribs of biaxial geogrid depends on the geometry properties of the geogrid, such as rib shape and apertures size, the stiffness of the ribs, and the properties of aggregates. Research has shown that biaxial geogrid cannot provide uniform tensile resistance in all directions. To overcome this problem, a geogrid product with triangular apertures was developed and introduced into the market. Recent studies showed that the triangular aperture geogrid can provide nearly uniform tensile resistance in all directions and is more efficient in improving the performance of reinforced bases as compared with biaxial geogrid. However, the performance of triangular aperture geo...

1 December 2016 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
YJYan Jiang
Yan Jiang
JHJie Han
Jie Han
RPRobert L. Parsons
Robert L. Parsons
JBJames J. Brennan
James J. Brennan
Mechanically stabilized earth (MSE) walls reinforced with geosynthetic have been used extensively in highway projects around the world. Typical vertical spacing of geosynthetic reinforcement used in the design of an MSE wall is 0.6 m. This large reinforcement spacing requires a high reinforcement connection strength and may result in wall-facing bulging in the practice. To alleviate such problems, use of secondary reinforcement between primary reinforcement layers was proposed. However, this idea was not verified in the field. In this study, three MSE wall sections reinforced with geogrid layers were constructed and monitored in the field: (1) an MSE wall section with uniaxial geogrid layers as primary and secondary reinforcement; (2) an MSE wall section with uniaxial geogrid layers as primary reinforcement and with biaxial geogrid layers as secondary reinforcement; and (3) an MSE wall section with uniaxial geogrid layers as primary reinforcement only (i.e., the control section). Earth pressure ce...

2 April 2014
Verified
Conference Paper
Closed access
CLCheng Lin
Cheng Lin
JHJie Han
Jie Han
Caroline BennettCaroline Bennett
Caroline Bennett
RPRobert L. Parsons
Robert L. Parsons
Scour is a major cause for bridge failure. To understand the characteristics of bridge failures under scour conditions and provide useful information for scour countermeasure, this study reviewed and analyzed totally 36 historical cases of bridge failure due to scour, including their hydraulic, geotechnical, and structural conditions and failure modes. Based on the collected data, most of scour depths (i.e. up to 41%) ranged from 0.5 to 5 m; but, the maximum scour depth could be up to 15 m. Local scour was accounted for 64% bridge failures, followed by channel migration (14%), and contraction scour (5%). Possible bridge failure modes due to scour included vertical failure, lateral failure, torsional failure, and bridge deck failure. Approximately 70% of bridge failures were lateral and vertical. The findings from this study can be updated when more cases of bridge failure under scour conditions are collected and/or become available.

1 March 2017 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
JTJitendra K. Thakur
Jitendra K. Thakur
JHJie Han
Jie Han
RPRobert L. Parsons
Robert L. Parsons
A significant amount of recycled asphalt pavement (RAP) material is produced from flexible pavement rehabilitation projects. RAP can be used as a base course material for sustainable pavement construction. Performance of a pavement largely depends on the strength of its foundation, which consists of the subgrade and base course layers. Geocell was used in this study to increase the strength of RAP bases. Nine large-scale laboratory cyclic plate loading tests were conducted on unreinforced and geocell-reinforced RAP bases with three different thicknesses (150, 230, and 300 mm) over weak and moderate subgrades to investigate the influence of geocell confinement, base course thickness, base course strength, and subgrade strength on permanent and resilient deformations of RAP bases. The subgrade was prepared by mixing Kansas River sand with kaolin and compacted at weak [target California bearing ratio (CBR)=2%] and moderate (target CBR=5%) strengths. The test results showed that geocell confinement im...

1 October 2013 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
JTJitendra K. Thakur
Jitendra K. Thakur
JHJie Han
Jie Han
RPRobert L. Parsons
Robert L. Parsons
The use of recycled asphalt pavement (RAP) materials for roadway construction is a sustainable approach and has received more attention in the recent years. However, permanent deformation, or rutting, is one of the concerns in the use of RAP as a base course due to traffic loading and creep deformation. To minimize the creep deformation, use of a novel polymeric alloy (NPA) geocell was proposed to confine the RAP. One tensile creep test was conducted at a room temperature of approximately 25°C to investigate the creep behavior of the geocell. Nineteen static plate-loading tests were conducted at a room temperature using a medium-sized loading system to evaluate the applied vertical stress-displacement response, the creep strain—time relationship, and the factors influencing the creep deformations of RAP bases. In order to verify the repeatability of the test method, two repeated creep tests were conducted. Well-graded aggregate cover was used in place of the RAP cover to investigate the cover effe...