The transition of Laser Powder Bed Fusion (LPBF) toward meter-scale fabrication is fundamentally bottlenecked by the spatial heterogeneity of the process gas flow, which dictates the reliability of large-scale structural components. This study provides a systematic investigation into the non-uniform flow field characteristics within gas-flow-sensitive zones (inlet/outlet) of a 1:1 scale forming chamber and their deterministic impact on Ti-6Al-4V alloy performance. By integrating high-fidelity Computational Fluid Dynamics (CFD) with multi-position micro-sampling, we reveal that gas velocity extremes—either insufficient (2.25 m/s) or excessive (3.75 m/s)—induce deleterious vortices and "kinetic freezing" effects. These disturbances lead to coarse α -laths, localized micro-strain accumulation, and severe crystallographic texture re-intensification, particularly in the outlet regions prone to backflow. Conversely, we identify an optimal "laminar window" at 3.00 m/s that promotes balanced β to α decomposition and stochastic α -variant selection. This results in a refined, needle-like α microstructure with weakened texture and minimized micro-strain (KAM ~ 0.45°). Consequently, a record-level spatial consistency is achieved across the 1.5-meter build envelope, yielding a superior strength–ductility synergy (UTS: 1037 MPa, Elongation: 13.67%). This work establishes a multi-scale "flow-microstructure-performance" correlation, providing a theoretical framework for achieving deterministic quality in large-scale metal additive manufacturing.
The instability of the flow field in meter-scale laser powder bed fusion remains a critical bottleneck for fabricating large-scale and high-performance Ti-6Al-4V components. This study investigates the correlation between process gas flow velocity and the final quality of the central region in an EP-M1550 system with a 1.5-meter-scale build chamber. By integrating 1:1 scale CFD simulations with multi-scale characterizations including EBSD, HRTEM, and GPA, the mechanism of flow-field-regulated microstructural evolution was elucidated. Results demonstrate that a gas flow velocity of 3.00 m/s establishes a stable laminar flow, providing an optimal cooling rate that promotes complete β to α phase decomposition and randomizes α -variant selection. This optimization leads to the minimum residual β phase, the weakest crystallographic texture, and a synergistic substructure characterized by low-density dislocations and coordinated [1012] tensile twins. Conversely, a lower velocity of 2.25 m/s triggers diffusion-controlled coarsening and micro-defects, while a higher velocity of 3.75 m/s induces a "dynamic freezing" effect, retaining metastable β phase and complex lattice strains. The sample produced at 3.00 m/s achieved a superior strength-ductility balance with a UTS of 1042 MPa and an elongation of 14.0%. These findings reveal that the process gas flow governs the macro-performance by modulating the thermal cycles and stress states at the molten pool scale, providing a theoretical foundation for quality control in large-format additive manufacturing.