8 June 2017 in Journal of Applied Physics
To reduce the level of thermally generated electrical noise transmitted to superconducting quantum devices operating at 20 mK, we have developed thin-film microwave power attenuators operating from 1 to 10 GHz. The 20 and 30 dB attenuators are built on a quartz substrate and use 75 nm thick films of nichrome for dissipative components and 1 μm thick silver films as hot electron heat sinks. The noise temperature of the attenuators was quantified by connecting the output to a 3D cavity containing a transmon qubit and extracting the dephasing rate of the qubit as a function of temperature and dissipated power in the attenuator. The minimum noise temperature of the output from the 20 dB attenuator was mK for no additional applied power and mK when dissipating 30 nW. In the limit of large dissipated power ( nW), we find , consistent with detailed thermal modeling of heat flow in the attenuators.
27 April 2015 in Applied Physics Letters
Random tunneling two-level systems (TLSs) in dielectrics have been of interest recently because they adversely affect the performance of superconducting qubits. The coupling of TLSs to qubits has allowed individual TLS characterization, which has previously been limited to TLSs within (thin) Josephson tunneling barriers made from aluminum oxide. Here, we report on the measurement of an individual TLS within the capacitor of a lumped-element LC microwave resonator, which forms a cavity quantum electrodynamics (CQED) system and allows for individual TLS characterization in a different structure and material than demonstrated with qubits. Due to the reduced volume of the dielectric (80 μm3), even with a moderate dielectric thickness (250 nm), we achieve the strong coupling regime as evidenced by the vacuum Rabi splitting observed in the cavity spectrum. A TLS with a coherence time of 3.2 μs was observed in a film of silicon nitride as analyzed with a Jaynes-Cummings spectral model, which is larger than seen from superconducting qubits. As the drive power is increased, we observe an unusual but explicable set of continuous and discrete crossovers from the vacuum Rabi split transitions to the Glauber (coherent) state.
23 February 2005 in Physical Review B
We analyze the effect of dissipation and low-frequency current noise on quantum coherence in a current-biased Josephson junction that has low damping. Developing a stochastic Bloch equation for the reduced density matrix of the system, we determine the resonance response of the system to a weak external microwave current drive. We characterize the response by finding the spectroscopic coherence time as a function of the energy relaxation time and the current noise power spectral density. For current noise with a constant spectral density up to a frequency , we find that the resonance broadening is proportional to the noise spectral density, while for , the broadening is proportional to the rms current noise. We compare our results to microwave spectroscopy data on Nb and Al tunnel junctions at milli-Kelvin temperatures and find good agreement between the measured response spectra and our model simulations.
15 April 2019 in Applied Physics Letters
We demonstrate improvements to the cooling power of broad bandwidth (10 GHz) microwave attenuators designed for operation at temperatures below 100 mK. By interleaving 9-μm thick conducting copper heatsinks in between 10-μm long, 70-nm thick resistive nichrome elements, the electrical heat generated in the nichrome elements is conducted more readily into the heatsinks, effectively decreasing the thermal resistance between the hot electrons and cold phonons. For a 20 dB attenuator mounted at 20 mK, a minimum noise temperature of ∼ 50 mK was obtained for small dissipated powers ( nW) in the attenuator. For higher dissipated powers, we find , with nW corresponding to a noise temperature of 90 mK. This is in good agreement with thermal modeling of the system and represents nearly a factor of 20 improvement in cooling power or a factor of 1.8 reduction in for the same dissipated power, when compared to a previous design without interleaved heatsinks.
4 January 1993 in Physical Review Letters
The observation of magnetic flux noise in superconducting thin-film flux transformers of enables us to measure a very small, frequency-dependent resistance (f) in the films, caused by vortex motion. In static magnetic fields below T and at voltages down to V , is proportional to the frequency f at which the measurement is made, is approximately independent of temperature, and decreases with increasing static current in the transformer. This behavior cannot be explained by certain currently accepted models of dissipation arising from vortex motion, but is consistent with a model in which independent vortices hop between two potential wells in a confined region.
1 March 1991 in IEEE Transactions on Magnetics