27 April 2010 in Rapid Prototyping Journal
Purpose: The purpose of this paper is to study the effect of laser fluence on the post‐transfer cell viability of human colon cancer cells (HT‐29) during a typical biofabrication process, matrix‐assisted pulsed‐laser evaporation direct‐write (MAPLE DW).Design/methodology/approach: The post‐transfer cell viability in MAPLE DW depends on various operation conditions such as the applied laser fluence. HT‐29 cell was selected as a model mammalian cell to investigate the effect of laser fluence on the post‐transfer cell viability. MAPLE DW‐based HT‐29 cell direct writing was implemented using an ArF excimer laser under a wide range of laser fluence. Trypan blue dye‐exclusion was used to test the post‐transfer cell viability.Findings: It has been observed that: the HT‐29 cell viability decreases from 95 to 78 percent as the laser fluence increases from 258 to 1,482 mJ/cm2; and cell injury in this study is mainly due to the process‐induced mechanical stress during the cell droplet formation and landing processes while the effects of thermal influence and ultraviolet radiation are below the level of detection.Research limitations/implications: This paper reveals some interesting relationships between the laser fluence and the post‐transfer mammalian cell viability and injury, and the resulting knowledge of these process‐related relationships helps the wide implementation of MAPLE DW‐based biofabrication. Post‐transfer cell injury reversibility and cell proliferation capacity need to be further elucidated.Practical implications: This paper will help the wide implementation of cell direct‐write technologies including MAPLE DW to fabricate biological constructs as artificial tissues/organs and bio‐sensing devices.Originality/value: The shortage of donor organs and the need of various bio‐sensing devices have significantly prompted the development of various biological material‐based direct‐write technologies. Process‐induced cell injury happens during fabricating of biological constructs using different direct‐write technologies including MAPLE DW. The post‐transfer cell viability is a key index to evaluate the feasibility and efficiency of any biofabrication technique. This paper has investigated the effect of laser fluence on the post‐transfer HT‐29 cell viability and injury. The knowledge from this study will help effectively and efficiently fabricate various biological constructs for organ printing and biosensor fabrication applications.
1 May 2009 in Journal of Applied Physics
Matrix-assisted pulsed-laser evaporation direct-write (MAPLE DW) is emerging as a promising technique for printing microelectronics as well as fabricating biological constructs. For disparate MAPLE DW-based microfabrication applications, the droplet formation during MAPLE DW should be first carefully understood. Toward this goal, this study aims to study the effects of laser fluence and material properties of material to be transferred on the formed droplet in direct writing glycerol-water droplets using MAPLE DW. It was found that (1) at a given glycerol concentration ratio, the droplet diameter was linearly dependent on the laser fluence, and the slope of this relationship was dependent on the glycerol concentration, and (2) the droplet diameter had no systematic relationship with the glycerol concentration ratio. This study reveals important phenomena for droplet formation in MAPLE DW; further theoretical modeling is expected to further explain these observations.
15 August 2009 in Journal of Applied Physics
Matrix-assisted pulsed-laser evaporation direct-write (MAPLE DW) has been emerging as a promising biological construct fabrication technique. The post-transfer cell viability in MAPLE DW depends on various operation conditions such as the applied laser fluence; unfortunately, the effect of laser fluence on the post-transfer cell viability has not been well elucidated. This work aims to study the effect of laser fluence on the post-transfer cell viability and the cell recovery ability in MAPLE DW of yeast cells (Saccharomyces cerevisiae). It has been observed that (1) yeast cell viability decreases as the laser fluence increases from 85 to around and (2) some of the MAPLE DW process-induced cell damage is reversible. The post-transfer yeast cell recovery is a function of laser fluence; however, this dependence relationship is not monotonic. Future work is needed to better understand the physical and chemical mechanisms of the above observations.
5 January 2011 in Journal of Biomechanical Engineering
Laser direct-write technology such as modified laser-induced forward transfer (LIFT) is emerging as a revolutionary technology for biological construct fabrication. While many modified LIFT-based cell direct writing successes have been achieved, possible process-induced cell injury and death is still a big hurdle for modified LIFT-based cell direct writing to be a viable technology. The objective of this study is to propose metallic foil-assisted LIFT using a four-layer structure to achieve better droplet size control and increase cell viability in direct writing of human colon cancer cells (HT-29). The proposed four layers include a quartz disk, a sacrificial and adhesive layer, a metallic foil, and a cell suspension layer. The bubble formation-induced stress wave is responsible for droplet formation. It is found that the proposed metallic foil-assisted LIFT approach is an effective cell direct-write technology and provides better printing resolution and high post-transfer cell viability when compared with other conventional modified LIFT technologies such as matrix-assisted pulsed-laser evaporation direct-write; at the same time, the possible contamination from the laser energy absorbing material is minimized using a metallic foil.
15 April 2011 in Journal of Applied Physics
Encapsulated microspheres have been widely used in various biomedical applications. However, fabrication of encapsulated microspheres from highly viscous materials has always been a manufacturing challenge. The objective of this study is to explore a novel metallic foil-assisted laser-induced forward transfer (LIFT), a laser-assisted fabrication technique, to make encapsulated microspheres using high sodium alginate concentration solutions. The proposed four-layer approach includes a quartz disk, a sacrificial and adhesive layer, a metallic foil, and a transferred suspension layer. It is found that the proposed four-layer modified LIFT approach provides a promising fabrication technology for making of bead-encapsulated microspheres from highly viscous solutions. During the process, the microsphere only can be formed if the direct-writing height is larger than the critical direct-writing height; otherwise, tail structured droplets are formed; and the encapsulated microsphere diameter linearly increases with the laser fluence and decreases with the sodium alginate concentration.
14 March 2011 in Journal of Manufacturing Science and Engineering
Laser-assisted cell direct-write technique has been a promising biomaterial direct-write method. For safe and reproducible cell direct writing, cell injury due to process-induced external stress must be understood in addition to biological property research. The objective of this study is to model the thermoelastic stress wave propagation inside the coating in laser-assisted cell direct writing when vaporization and/or optical breakdown of coating materials is/are not available. It is found that a bipolar pressure pair, with peak magnitudes on the order of 1 MPa or higher, has been developed within a finite thin coating medium. Shorter duration laser pulses lead to higher thermoelastic stresses. This study will help to understand the photomechanical stress and its relevance with biomaterial damage in laser-assisted cell direct writing.