As the demand for energy is rapidly growing worldwide ahead of energy supply, there is an impulse need to develop alternative energy-harvesting technologies to sustain economic growth. Due to their unique optical and electrical properties, one-dimensional (1D) electrospun nanostructured materials are attractive for the construction of active energy harvesting devices such as photovoltaics, photocatalysts, hydrogen energy generators, and fuel cells. 1D nanostructures produced from electrospinning possess high chemical reactivity, high surface area, low density, as well as improved light absorption and dye adsorption compared to their bulk counterparts. So, research has been focused on the synthesis of 1D nanostructured fibers made from metal oxides, composites, dopants and surface modification. Furthermore, fine tuning these NFs has facilitated fast charge transfer and efficient charge separation for improved light absorption in photocatalytic and photovoltaic properties. The recent trend in exploring these electrospun nanostructures has been promising in-terms of reducing costs and enhancing the efficiency compared to conventional materials. This review article presents the synthesis of 1D nanostructured fibers made via electrospinning and their applications in photovoltaics, photocatalysis, hydrogen energy harvesting and fuel cells. The current challenges and future perspectives for electrospun nanomaterials are also reviewed.
20 September 2013 in ACS Applied Materials & Interfaces
The re-exploration of the nanostructure production technique known as electrospinning was carried out in the past decade due to its simplicity and uniqueness of producing nanostructures. As nanotechnology is one of the most promising and growing technologies today, a large amount of work is being carried out in an extensive area and shows an extremely huge potential for miraculous works in the fields of medicine and biotechnology. These nanostructures were found to be of great significance because of their inherent properties such as large surface area to volume ratio and the engineered properties such as porosity, stability and permeability. The functionality and applicability of these nanostructures were further improved by incorporating secondary phases either during electrospinning or in the post-processing resulting in the composite nanostructures. These secondary phases may include metal oxides, carbon nanotubes, precious metals, gold nanoparticles and hydroxyapatite. Nanofibrous materials that mimic the native extracellular matrix (ECM) and promote the adhesion of various cells are being developed as tissue-engineered scaffolds for the skin, bone, vasculature, heart, cornea, nervous system and other tissues. The article discusses in detail the applicability of these composite fibers in energy, sensors, filters, biotechnology and details the technological issues, research challenges and future trends.
α-Fe2O3 nanorods are synthesized by electrospinning of polyvinylpyrrolidone (PVP)/ferric acetyl acetonate (Fe(acac)3) composite precursors and subsequent annealing at 500 °C for 5 h. X-ray diffraction and Raman spectroscopy analyses confirm the formation of a hematite structure as the predominant phase. The electron microscopy studies show that the electrospun α-Fe2O3 nanorods are composed of agglomerates of nano-sized particles and the average diameter of the nanorods is found to be 150 nm. Li-storage and cycling properties are examined by galvanostatic cycling in the voltage range 0.005–3 V vs. Li at various current densities and it is complemented by cyclic voltammetry. The electrospun α-Fe2O3 nanorods exhibit a high reversible capacity of 1095 mA h g−1 at 0.05 C, are stable up to 50 cycles and also show high rate capability, up to 2.5 C. The high rate capability and excellent cycling stability can be attributed to the unique morphology of the macroporous nanorods comprised of inter-connected nano-sized particles, thus making electrospun α-Fe2O3 a promising anode material for Li-ion batteries.
In this manuscript, a dramatic increase in the energy density of ~ 69 Wh kg−1 and an extraordinary cycleability ~ 2000 cycles of the Li-ion hybrid electrochemical capacitors (Li-HEC) is achieved by employing tailored activated carbon (AC) of ~ 60% mesoporosity derived from coconut shells (CS). The AC is obtained by both physical and chemical hydrothermal carbonization activation process and compared to the commercial AC powders (CAC) in terms of the supercapacitance performance in single electrode configuration vs. Li. The Li-HEC is fabricated with commercially available Li4Ti5O12 anode and the coconut shell derived AC as cathode in non-aqueous medium. The present research provides a new routine for the development of high energy density Li-HEC that employs a mesoporous carbonaceous electrode derived from bio-mass precursors.
3 August 2012 in The Journal of Physical Chemistry C