Laser additive manufacturing is a novel tool for processing compositionally-graded alloys that are challenging to process via a conventional route. This article discusses a novel combinatorial approach for assessing composition–microstructure–magnetic property relationships, using laser deposited compositionally-graded Fe–Si–B–Nb–Cu alloys (by changing the silicon to boron ratios). The microstructure of Fe–Si–B–Nb–Cu alloys with a lower Si to B ratio consists of dendritic α-Fe3Si grains, with B and Nb partitioning to the inter-dendritic regions, resulting in the formation of Fe3B grains. As the Si/B ratio increases, the (Fe, Nb) enriched eutectic phase was observed along with α-Fe3Si grains; and no Fe3B was observed. These microstructural changes with varying Si/B ratios significantly affect the magnetic properties of these laser-deposited soft magnetic alloys.
We study through the time evolution of magnetization the low-temperature (T) dynamics of the metastable coexisting phases created by traversing different paths in magnetic field H and T space in a shape memory alloy system, Ni45Co5Mn38Sn12. It is shown that these coexisting phases consisting of a fraction of kinetically arrested austenite phase and a remaining fraction of low-T equilibrium martensitic phase undergo a slow relaxation to low magnetization (martensitic) state but with very different thermomagnetic history-dependent rates at the same T and H. We discovered that, when the nucleation of the martensitic phase is initiated at much lower T through the de-arrest of the glasslike arrested state contrasted with the respective first-order transformation (through supercooling at much higher T), the long-time relaxation rate scales with the nonequilibrium phase fraction but has a very weak dependence on T. This is explained on the basis of the H-T path dependent size of the critical radii of the nuclei and the subsequent growth of the equilibrium phase through the motion of the interface.