8 November 2012 in Landslides
1 March 2013 in Engineering Structures
20 March 2023 in Construction and Building Materials
1 January 2017 in Procedia Engineering
The research campaign aimed on the better understanding of behavior of prestressed soil anchors in neogene clay, including conduction of variety of in-situ (CPT, PMT) and laboratory (Triaxial test, Simple shear test an Oedometric test) ground investigation methods, has been done during 2012 – 2015 in Czech Republic. The stress – strain diagrams and distribution of axial force along the anchor free length and anchor bond length was determined, based on the data obtained from variety types of sensors placed onto the tendon and into the gravity and post-grouted part of the grout body. On the basis of this information the software application for prediction of the anchor pull-out force and stress-strain diagram was developed, calibrated and verified. The application for purposes of conduction of prestressing tests and test reports elaboration was programmed also. Research activities leading to development of the pair of forenamed software are described in paper
6 September 2018 in JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT
A variety of engineering activities require reliable evaluation of rock strength. For instance, the stability of rock slopes depends on structural geology of rock massif in which the slope is excavated. Hoek-Brown (HB) failure criterion applied in rock design practice introduces factors based on the properties of jointed rock. The non-linear finite element safety calculation is conveniently used for calculation safety the factor of slope stability. The Mohr-Coulomb (MC) failure (strength) criterion for soil is widely applied in geotechnical design. Therefore, the appropriate transformation from HB to the equivalent MC, employing angle of shearing resistance φ and cohesion c, is necessary. This article studies the effect of jointed rock massif properties on the transformed MC parameters by using Sobol’s global sensitivity analysis (SSA) and HB transformation equations. Statistical parameters needed for the evaluation of sensitivity analysis are processed using classical statistical methods upon the emulation of Latin Hypercube Sampling simulation methods. Developed and adapted by authors techniques are illustrated by processing real rock investigation data from survey of the trachyte massif located in the Czech Republic. The first and higher order effects of random inputs are identified using SSA. It is illustrated that the effects of inputs on the MC parameters varies significantly depending on the discontinuity distribution and height of the slope.
30 September 2017 in The Baltic Journal of Road and Bridge Engineering
The paper presents an application of statistical and numerical methods for the determination of the forcedisplacement curves and that of pullout capacity of prestressed grouted ground anchors installed in Miocene clay. A regression analysis of data from a database of acceptance test records for ground anchors to create has been performed, the force-displacement curve of the tested anchor corresponding to the range of loads applied for acceptance tests has been created. A linear regression model, employing the weighted least squares method and robust standard errors techniques were concluded to serve as a reliable statistical method suitable for achieving this goal. The discovered linear regression dependence then served as a lower control limit for the displacement values calculated at the anchor head applying the numerical model. A finite element model has been created to predict the behaviour of ground anchors being installed in fine-grained soils. The developed numerical model that employs Mohr-Coulomb strength criterion constitutive model evaluates the influence of high-pressure grouting by development additional radial stresses and that of an increment of fixed length diameter.