19 August 2025 in IEEE Sensors Journal
In oil and gas exploration and production, downhole fallen objects in wells represent a significant operational challenge that demands immediate attention. Timely detection of such fallen objects is crucial to ensuring the safe and efficient operation of oil wells. This study adopts a comprehensive approach that integrates finite element simulations with experimental validation to investigate the potential application of ultrasonic imaging technology for downhole fallen objects detection. The study first employed finite element simulations to model the impact of fallen objects on acoustic wave propagation, with a focus on examining the correlations between the reflected signal and the fallen objects’ spatial position, size, and the probe’s excitation frequency. Based on the simulation results, an innovative ultrasonic imaging method for detecting fallen objects was proposed. Building upon the insights gained from numerical simulations, a dedicated experimental platform was developed to validate the proposed approach. Both simulations and experiments successfully generated two-dimensional overhead images of the fallen objects, facilitating the identification and characterization of their properties. The findings underscore the feasibility and effectiveness of ultrasonic imaging technology for detecting downhole fallen objects in the water and mud, but are theoretically extensible to oil/gas via simulation. This research not only demonstrates the practical application of this technique but also offers valuable insights for advancing future studies in ultrasonic fallen object detection.
29 May 2026 in IEEE Sensors Journal
This study systematically analyzed thermal interference in fiber-optic telemetry and distributed sensing systems operating in high-temperature downhole environments. Utilizing a thermo-optic theoretical framework, we evaluated the thermally induced attenuation of single-mode (SMF) and multi-mode fibers (MMF) across a temperature range of 303.15–473.15 K. At 473.15 K, the MMF attenuation coefficient (2.5 ×10-5 dB/m) was significantly lower than that of SMF (1.5 × 10-3 dB/m). Further analysis indicates that at a wavelength of 1.55 μm, the thermo-optic effect (TOE) significantly narrows the signal bandwidth. While MMF exhibits pronounced temperature-dependent dispersion, SMF phase evolution remains nearly linear. Spectral analysis reveals that the MMF attenuation peak occurs at 1.55 μm, with an amplitude approximately twice that at other wavelengths. Additionally, the SMF mode field diameter (MFD) expands with wavelength but decreases linearly with temperature at a gradient of 0.008 K-1. These results suggest that although MMF offers lower attenuation, its intense thermally induced dispersion limits long-range performance. In contrast, SMF demonstrates superior phase stability. Consequently, these findings establish a theoretical foundation for fiber selection and temperature compensation design in high-temperature downhole systems.