28 September 2022 in Journal of Rare Earths
31 July 2023 in Optics & Laser Technology
29 June 2022 in Ceramics International
1 October 2022 in Optical Engineering
Rare earth ion doping is considered to be a feasible way to improve the optical properties of glass in recent years. We investigate the luminescence characteristics of Ho3 + -Er3 + -Yb3 + triple-doped tellurite glass (TeO2-ZnO-WO3-La2O3) at 2.0 μm. A series of characterization analyses on the prepared samples, such as x-ray diffractometer (XRD) pattern, Raman spectrum, differential scanning calorimetry (DSC) curve analyses, absorption spectrum, emission spectrum, and fluorescence decay curve, were performed. XRD pattern and DSC curve analyses indicate that the glass sample exhibits a typical amorphous structure with excellent thermodynamic stability. Through the absorption spectrum, the position and intensity of the absorption peak of the glass sample can be detected. Under an excitation of 980 nm laser, the 2.0-μm emission peak intensity of the glass sample increases by about 1500%, which is attributed to the energy level transition among Ho3 + , Er3 + , and Yb3 + . By analyzing the energy level transition of Ho3 + , Yb3 + , and Er3 + ions, the energy transfer mechanism and fluorescence lifetime can be obtained, and then the fluorescence enhancement phenomenon of Ho3 + -Er3 + -Yb3 + triple-doped tellurite glass at 2.0 μm can be explained. It is demonstrated that the as-prepared Ho3 + -Er3 + -Yb3 + triple-doped tellurite glass has potential for the application of fiber lasers and fiber amplifiers.
1 September 2022 in Optical Engineering
Indirect interband photonic transition is an important approach to achieve on-chip complete optical signal isolation. We demonstrate that the operational isolation bandwidth based on this effect can be increased by utilizing non-interfering transition channels obtained from the process of transition channel engineering. Multiple optical modes can be excited through non-interfering channels and be absorbed by matched filters without interfering with each other, thus achieving multi-frequency complete optical isolation. With two non-interfering transition channels, an optical isolator design that achieves complete isolation at two frequencies is proposed as an example. The potential design of multi-frequency isolator is also discussed. All the results are verified with finite-difference time-domain simulation.
22 April 2026 in Optical Materials