10 March 2022 in Measurement Science and Technology
Liquid film plays a crucial role in void fraction, friction pressure drops, momentum and heat transfer in the two-phase flow. The film thickness measurement experiments of annular flow at four pressure conditions have been conducted using near-infrared sensor. The signal is processed by variational mode decomposition, whose parameters are optimized using the sparrow search algorithm. The envelope spectrum and Pearson correlation coefficient judgment criteria were adopted for signal reconstruction, and the value of the liquid film thickness is obtained. The effect (such as flow rate, pressure, entrainment, etc) of the liquid film thickness are analyzed theoretically. The characterization parameters
We
g
″, We
l
, Nμ
l
and X mod have been extracted and optimized, and a new average liquid film thickness correlation is proposed. The laboratory results indicate that the mean absolute percentage error of the predictive correlation is 4.35% (current data) and 12.02% (literatures data) respectively.
21 November 2022 in Measurement Science and Technology
In slug flow, the wetted wall fraction and liquid holdup of the liquid film section are key parameters affecting the mass transfer and radial velocity distribution of the liquid film, the friction pressure drop, the momentum transfer between the two phases, and heat transfer characteristics. A modified wetted wall fraction and liquid holdup model based on the modified apparent rough surface (MARS) model is proposed in this study, which considers the friction coefficient and shear stress on the gas–wall, liquid–wall and gas–liquid interfaces and introduced the modified average interface velocity of the liquid film. Air–water slug flow experiments were in a 50 mm diameter acrylic glass pipe equipped with a high-speed camera. The edge detection operator was optimized to obtain the wetted wall fraction and liquid holdup at the liquid film section based on image analysis technology. A comparative analysis of the model performance shows that the mean absolute percentage error (MAPE) of the wetted wall fraction model is 9.4%, and the 96.1% relative deviations are within the ±20% error band. The MAPE of the liquid holdup model is 8.04%, and 93.4% relative error is within the ±25% error band. The modified MARS model has good prediction ability for the wetted wall fraction and liquid holdup of the gas–liquid slug flow.
1 October 2023 in Journal of Mountain Science