23 January 2018 in IEEE Transactions on Electron Devices
The impact of thermal state on backward-wave oscillation (BWO) in a helix traveling-wave tube (TWT) under operation is explored, considering total thermal losses induced by high-frequency electromagnetic field power dissipation on helix, output port, carbon-coating attenuators, support rods, inner wall of the barrel, and the electron beam collision on the helix. By numerically solving the Maxwell equations, the electron motion equation, the heat conduction equation, and the thermal expansion equation, we analyze integrally the beam-wave interaction process and the resulting thermal distribution as well as thermal deformation of both slow wave structure and the output port. The simulation results for a broadband (8-18 GHz) helix TWT show the temperature on the last 20 turns of the helix is the highest, with a peak value of 347 °C at the end of helix. The greatest thermal deformation (0.0151 mm) is located on the inner conductor of the output port. The experimental result for the saturated output power of the TWT prototype shows a BWO power hole at 11 GHz, which is not found in simulation without considering thermal deformation. We find also that, considering the thermal deformation of helix and output port, BWO occurs at 22.4 GHz with the amplitude of 0.0708 V, which is over 5 times of that without considering thermal deformation, and it induces the same power hole as the experimental one at 11 GHz. Thermal deformation is one of the contributing factors for BWO in the helix TWT.
12 July 2022 in IEEE Transactions on Plasma Science
Backward-wave oscillation (BWO) is one of the important factors affecting the output power and operating stability of helix traveling-wave tubes (TWTs). A novel helical slow-wave structure (SWS) with six helix-support rods at the end of SWS of TWT is proposed to suppress BWO caused by thermal deformation. An electrical–thermal–mechanical finite element coupling analysis model for the TWT is established. The simulation analysis shows that the maximum temperature at the end of the helix is reduced by 49 °C, the maximum thermal deformation is reduced by 56%, and the saturated output power at 11 GHz is increased from 464 to 519 W. The analysis confirms that the novel SWS can effectively suppress BWO caused by thermal deformation in a high-power TWT and improve the TWT’s output power and operating stability.
23 April 2018 in IEEE Transactions on Plasma Science
An equivalent multisector analytical method is proposed for the high-frequency characteristics of the slow-wave structure (SWS) in an integrated three-helix traveling wave tube. The discrete unit in the SWS is divided into multiple regions, and every region is treated equivalently as a sector using the equal area method. The accuracy of the equivalent multisector structure is verified by comparing it with an equivalent circular structure and the original SWS in computer simulation technology (CST). The analytical solution for high-frequency characteristics of the equivalent multisector structure is obtained by using the tape-helix model and the infinite number of vanes model. The calculation result is obtained and compared with the CST simulation result to analyze the accuracy of the method. The maximum error for dispersion characteristics and coupling impedance is 5.3% and 6.1%, respectively, so the feasibility of the analytical method is verified.